1 / 1
Wide base stand for Lutron Pico remote
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This desk stand for your Pico has a wide base to give it stability.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (3)Kolekcje (27)Powiązane
This desk stand for your Pico has a wide base to give it stability, and uses the mounting slot on the remote to lock into place. There's a lot of chamfering for easy handling.
Update 2024-01-29: I've added a new style that is slightly larger and less likely to tip over.
Printing instructions
- Choose which style you want (r1 or r2).
- Print the .stl file as-oriented.
Operating instructions
- Insert the remote gently until it clicks into place. You will need to remove the plastic blank tab that comes with it, if you haven't done so already.
- Remove the remote by gently sliding it out using a fingernail at the bottom for force. This is intentionally a bit difficult to do.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., base dimensions, angle, etc.), send me a message and I'll see what I can do.