1 / 1
Wide base stand for Lutron Pico remote
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This desk stand for your Pico has a wide base to give it stability.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 86
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This desk stand for your Pico has a wide base to give it stability, and uses the mounting slot on the remote to lock into place. There's a lot of chamfering for easy handling.
Update 2024-01-29: I've added a new style that is slightly larger and less likely to tip over.
Printing instructions
- Choose which style you want (r1 or r2).
- Print the .stl file as-oriented.
Operating instructions
- Insert the remote gently until it clicks into place. You will need to remove the plastic blank tab that comes with it, if you haven't done so already.
- Remove the remote by gently sliding it out using a fingernail at the bottom for force. This is intentionally a bit difficult to do.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., base dimensions, angle, etc.), send me a message and I'll see what I can do.