1 / 2
"LG Magic Remote" Wheel replacement (AN-MR19BA)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the Wheel in Magic remotes from LG which are prone to break in the original remotes
- Ocena
- 4,6 / 5
- Polubienia
- 32
- Pobrania
- 1094
- Wydruki
- 5
- Wyświetlenia
- 4739
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 12)Remiksy (2)Kolekcje (29)Powiązane
Replace the Wheel in Magic remotes from LG which are prone to break in the original.
- Although the model has intricate details, for me it worked better when printed on a FDM printer than with resin (I tried both). The reason is, my resin was too brittle and broke too after a while
- you will have to do some sanding after printing
- I used it with a AN-MR19BA but it might fit in other variants of the remote
- you will have to open up the remote: for me it worked best to start at the bottom of the remote and use a bonus card to pry it open (only use a card you don't need anymore)
- I have added the f3d model if improvements are needed
You will have to print it with supports in the orientation of the model