1 / 2
"LG Magic Remote" Wheel replacement (AN-MR19BA)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the Wheel in Magic remotes from LG which are prone to break in the original remotes
- Rating
- 4.6 / 5
- Likes
- 32
- Downloads
- 1,102
- Makes
- 5
- Views
- 4,763
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Replace the Wheel in Magic remotes from LG which are prone to break in the original.
- Although the model has intricate details, for me it worked better when printed on a FDM printer than with resin (I tried both). The reason is, my resin was too brittle and broke too after a while
- you will have to do some sanding after printing
- I used it with a AN-MR19BA but it might fit in other variants of the remote
- you will have to open up the remote: for me it worked best to start at the bottom of the remote and use a bonus card to pry it open (only use a card you don't need anymore)
- I have added the f3d model if improvements are needed
You will have to print it with supports in the orientation of the model