Rope Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why hide your remotes? Keep them within reach in a beautiful holder stylized with the appearance of rope!
- Ocena
- 4,979 / 5
- Polubienia
- 954
- Pobrania
- 3573
- Wydruki
- 52
- Wyświetlenia
- 10 746
- Oceny
- 47
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
Why hide your remotes? Keep them within reach in a beautiful holder stylized with the appearance of rope! 3 models to choose from!
- Dual - Holds remotes of all sizes with two compartments
- Short - Designed for smaller remotes (Firestick, Chromecast, etc.)
- Tall - For full size remotes
This is part of my Rope Series. You can view all of my Rope Series models in this collection.
Print Settings
Standard settings will work, but they are not ideal because of the slow print time. You can drastically speed it up by adjusting the following:
- 0% infill
- 3 perimeters
- Turn off “Ensure Vertical Wall Thickness”
This cuts hours off the print time, but the extra perimeter ensures that walls are printed with no gaps. In my case, it reduced the print time by 8+ hours (dual holder).
The following filament was used in the pictures above:
- Prusament Azure Blue PLA