Dell Poweredge 2.5" Caddy for 13th gen. servers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.5" caddy for Dell Poweredge R430, R630, R730, R730XD, and T630.
- Ocena
- 4,8 / 5
- Polubienia
- 72
- Pobrania
- 1148
- Wydruki
- 4
- Wyświetlenia
- 4181
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
Dell Poweredge 2.5" caddy for R430, R630, R730, R730XD, and T630. Prints well with PLA, but I do recommend using PETG. Please note the screenshot where support is required. It can be made pretty easy in PrusaSlicer or other slicing software with support enforcers. All other parts of the model can be printed with no support. I suggest mounting the hard drive in the caddy before removing the support material and releasing the lock mechanism.
Increase perimeters to 3 for added stability.
Please drop a like if you find it useful.
EDIT 11/04/2024: Did some minor adjustments to the print based on user feedback. Some people had reported minor issues with some models. Please download latest version (v3). Old version (v2) kept for reference.
EDIT 23/04/2024: Added a hard disk dummy in two different versions, so the caddy can be used without a disk. One prevent air flow through the slot.
The dummy will snap into the caddy and provide stability required for installation. Notice that one of the pins is slightly modified to fit the caddy. No screws are needed for this dummy, since it is a press fit.