Voron Design Filament Cards + Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Test- /Sample-Cards with a Caddy. Easy and quick print.
- Ocena
- 5 / 5
- Polubienia
- 194
- Pobrania
- 863
- Wydruki
- 17
- Wyświetlenia
- 4129
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- GNU General Public License v3.0
This set of filament cards and caddy comes handy for filament identification and labeling.
The cards are a quick print and also feature several test patterns as well.
Cards can be labeled on the backside.
Regarding the caddy it holds 25 filament cards at a reasonable space requirement.
Printing Recommendations:
0.2 mm layer hight, no supports needed 20 % infill, 3 perimeters.
Tipp: In case the caddy's seperators for the cards won't be sliced/printed, make sure to enable “print thin walls" feature.
Both models were designed by Voron Design and published under the GNU v3.0 license.
More information about this test print can be obtained on Voron's GitHub page.
Hope you enjoy using this model as much as I do.
Happy printing!