2.5" HDD / SSD to 3.5" HDD Adapter (Bottom Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to install a 2.5" drive where a 3.5" one mounts using the bottom screws.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 170
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket allows you to mount a 2.5" drive where a 3.5" one normally goes. I'm using it inside a Fujitsu Esprimo E400 case but it's a standard part. It'll fit in many other cases.
You'll need 8 screws; 4 to mount the bracket and 4 to mount the drive to the bracket.
Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.