2.5" SATA HDD Hard Drive Disk Holder/Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount to fix a 2.5" SATA HDD to a wall or any other vertical surface.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed to be fixed to any vertical surface and hold a 2.5" SATA HDD. It provides two mounting holes for screws. I also designed it with ventilation in mind to keep the hard drive cool and prevent it from overheating.
There are now two different versions available to fit SATA HHDs of both 9.5 mm and 15 mm thickness.
I use it to hide the hard disk I store my Wii U games on behind my TV cabinet. However, I believe there are plenty more use cases where this model could come in handy.
Print Instructions
Printed in PLA, but any rigid filament should do
2 wall loops
0.5 mm line width for both inner and outer walls to minimize the gap infill needed
5% gyroid sparse infill is what I used
Supports aren't needed
Model History
Date | Comment |
|---|---|
17-02-2026 | Original release for drives with a thickness of 9 mm |
07-08-2026 | Added an additional model for drives with a thickness of 15 mm |