1 / 10
North Pi Case - with rear IO adapter and NVMe SSD for Raspberry Pi 4B — zdjęcie 1
1 / 10

North Pi Case - with rear IO adapter and NVMe SSD for Raspberry Pi 4B

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This case allows you to use your Raspberry Pi 4B together with the X872 board and the Waveshare connector-adapter.

Ocena
0 / 5
Polubienia
5
Pobrania
25
Wydruki
0
Wyświetlenia
576
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Raspberry Pi 4B Case - X872 & Ice Tower Edition

This is a custom enclosure for the Raspberry Pi 4B, specifically designed to fit:

  • X872 Expansion Board (NVMe M.2 SSD support).

  • Waveshare Connector Adapter to route HDMI and USB-C ports to the rear for a cleaner setup.

  • Ice Tower Cooler for optimal thermal performance.

Key Features:

  • System Monitoring: Integrated slot for an SSD1306 OLED screen on the side panel to track real-time stats.

  • Improved Access: Redesigned side panel for easy removal and maintenance.

  • Plexiglass Ready: The side panel is designed to be easily swapped with a transparent plexiglass sheet to show off your internal build.

  • Enhanced Back Panel: Includes a dedicated Power Button for easy ON/OFF control and an exhaust 25x25x5mm fan to improve airflow.

  • Magnetic Front Panel: Features a front bar that is easy to mount/remove thanks to 6x2mm magnets.

  • Cable Management: Added a sleek top cable hider to keep the wiring organized and give the build a clean, professional look.

  • To use the PWM fans and the shutdown button add this instruction to your confix.txt:
    [all]
    dtoverlay=gpio-fan,gpiopin=18,temp=60000
    dtoverlay=gpio-shutdown,gpio_pin=27

GPIO Wiring Reference:

Component

Pin

Function

OLED Screen

1, 3, 5, 9

3V, SDA, SCL, GND

Fans

2, 4, 6, 12

5V (Fan1 & 2), 5V (Fan3), GND (ALL), PWM (ALL)

Power Button

5, 20

Signal & GND

Button LED

17, 25

3V & GND

BOM (Bill of Materials):

Electronics:

  • 1x Raspberry Pi 4B

  • 1x X872 Expansion Board

  • 1x Waveshare Connector Adapter

  • 1x GeekPi Ice Tower Cooler

  • 1x SSD1306 OLED Display

  • 1x 12mm Metal Power Button (with LED)

  • 1x 25x25x5mm Fan (Exhaust)

  • 2x 4010 5V PWM Fans (Front)

Hardware:

  • Inserts: 13x M2.5 Heat Stakes (Length 3mm, OD 4mm)

  • Magnets: 30x 6x2mm Round Neodymium Magnets

  • Spacers: 4x M2.5x9mm Brass Hex Spacers (6mm thread)

  • Screws:

    • 5x M2.5x5mm Countersunk (Back & Front panels)

    • 8x M2.5x8mm (Ice Tower & 25mm fan)

    • 4x M2.5x6mm (Connector adapter)

    • 4x M3x12mm (Front fans)

  • Nuts: 4x M3 Nuts (Front fans)

Tagi