Liczymy pasujące modele…
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Hexagonal Chainmail NASA Tie articulated If you like it, press like it! ;-) Like the idea of printable chainmails, but had no application for it…up to now ;-) Print it out and put a rubber band or something else through the parts at the…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
This case supports two 3.5" hard drives mounted vertically, with an intake fan for cooling. I used a Noctua NF-P12 PWM fan. On the exterior side of the fan, there is an AKASA Fan Filter GRM-120-30 dust filter, while on the interior side…
I wanted some larger key/numberplates because the originals that these were based on were a bit difficult to get a grip on. Source Fusion 360 file included. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
🇮🇩 Selamat Datang di Jakarta Welcome to Jakarta! This publication contains two different versions: A model created in Tinkercad by an 8th grade student codenamed “Silhouette”. They gave permission to be published in MiniWorld3D's catalog…
Stencil template - Gymnastic Size: 170x60x0,4 mm Can be resized/scaled. Stencil template for home decorating and arts & crafts. Scrapbooking, embossing, etc. STL files, 3MF files for Anycubic Kobra 3 and Bambu Lab printers (Bambu Studio…
I have installed an NRF24 module in my Lilygo T-Embed, so I created a back cover to accommodate two external antennas for 2.4GHz and 433MHz. Also it can be used if you like to install two external antennas to improve signal coverage. It…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
I wanted somewhere to securely backup my ever-growing pile of photos and documents, so I designed this small file/media server around the Framework 13 motherboard/battery. They're used in a pair for dual redundancy. Its main features are:…
A Scale model of the NASA JUNO spacecraft. Recommended: 0.16mm Layer height Print Jerk Linear Advance More Info: https://www.jpl.nasa.gov/news/press_kits/juno/science The principal goal of NASA’s Juno mission is to understand the origin…
A re-uploaded model from NASA 3D Resources of a 1U CubeSat. CubeSats are a type of nanosatellite that come in a variety of sizes, with the standard size being 10 centimeters by 10 centimeters by 10 centimeters, or 1U. CubeSats are small,…
Die Figur ist ca im Massstab 1:24 und ideal für Resin Druck
A conversion to turn the Framework 12 laptop mainboard into a FrameVault home server such as a NAS or Home Assistant system. Whether you have a spare mainboard from a Framework laptop upgrade or you just want to build your own home server…
NASTIER (Network-Attached Storage; Tiny; Inexpensive; Easy; Redundant) A ZimaBlade-based micro NAS with redundant Raid 1 storage and full server capabilities. Full instructions on my website here:…
Project: This is my remix of the 10 inch Rack 1 U HDD cages from https://makerworld.com/en/@OloDeepdelver. I added a mounting option for a ZimaBlade to act as my NAS as my entire Homelab is based on a 19 inch rack. This was printed in…
No need for further explanation :-)
This is a lens hood for the Panasonic 42.5mm f.17 micro four thirds lens. The mount snaps in place like the real lens hood. It is a little tricky to take off the first time (just like the real ones) but loosens up pretty quickly. It isn't…
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
Tool-less NAS enclosure designed specifically for the ZimaBoard 2 and two Seagate IronWolf 3.5 inch 12TB HDD. Can fit the fan for the ZimaBoard no problem, however you lose access to the PCIE 3.0 slot. HDD dimensions: 147mm x 102mm x 26mm…
NASA Fabric is more of a fidget toy then fabric. Its called NASA Fabric because of it hexagons shapes which looks like a part of a space ship
🧠 Zimaboard 2 NAS Case (Fully 3D Printable) A compact, fully 3D printable NAS enclosure designed specifically for the Zimaboard 2 project. Video overview and build process can be found via the link . ✨ Features 🖨 Fully 3D printable design…
Add a touch of fun and personality to your Ninebot helmet with these 3D-printed "bug" antennas! Designed for flexibility and durability, these antennas are printed in PETG filament and easily attach to the top of your helmet. Whether…
This is a cheese grate camera cage for the Panasonic GH4. https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch. This cage has a proper hotshoe catch to…
This print is build in one part and holds a Zimaboard (version 1) a 60 mm FAN, PCIe SATA card and a 5.25 inch SSD cage. To build it you need to screw all the parts in the correct order on the printed "holder" The FAN (screwed in from…
My Nas is a Qnap Ts-464U, but other will fit as well i guess. .STEP file is included so you can customize it. ABS/ASA/PLA/PETG 15-50% No Brim No Supports
A nice cloud-shaped enclosure for a Raspberry Pi 3 or 4 based DIY NAS which contains two M.2 SSD slots (i used https://www.amazon.de/gp/product/B075GVFCL8/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1 ). The case offers also…
A mix of the uConsole three antenna bracket (one piece) by dandrewe and the Hackergadgets cover for uConsole by the amazing strt_fnst I needed 5 antennas, but I don't use the antenna board from HackerGadgets, instead mine are IFX to…
4x M2.5 Einpressgewinde 4X M2.5 Abstandhalter 4x M2.5 Schraube 4x M2 6mm Schraube für Oled Dispalay 1x 12mm LED Knopf 1x 60mm Noctua Fan 13x Jumper Wire X825 V2.0 NAS Board Raspberry Pi 4 1x SSD/HDD 2x 4mm Acrylglas 100x200mm 1x 60mm…
A simple light GPS mount option for the source one V5 Frame, since most I could find were either too heavy (racer brain) or didn't have enough tilt (like seriously who cruises at 30 degrees?). Uses your standard two screw SMA mount, I…
Made this battery cover to adhere to the covered contacts requirement by airlines. May need a 2-3% size shift depending on battery. I found aftermarket batteries fit well but older OEM ones needed a bit larger of a cap.
Here is the parts list I used: Battery: https://www.amazon.com/Meshnology-10000mAh-1163115-Protection-Insulated/dp/B0F1FMN2C5/ref=sr_1_1?sr=8-1 RAK19003:…
I really liked NAS solution from Jeff Geerling , but wanted to push it little bit more: add 5th disk. That's why I designed this bracket which replaces original bracket from Penta SATA HAT. This bracket will allow you to mount 5th disk…
This model is for a Panasonic Desktop fan. Pull/Push this knob to engage/disengage oscillation.
A perhaps overbuilt shelf bracket replacement for Ikea Svalnas shelves commissioned by Idauria . Print with supports for the pin, 2 shell perimeter seems to be strong enough, print with 3 if you are worried about it. 15% grid or…
Doubt anyone will have use for it, but here just in case some part of it is useful. I had a Thermaltake RC3400101A MAX-3543 sitting unused after I upgraded to NVMEs and decided I wanted to put it to good use as a backup server but in NAS…
Sometimes people want to slice their way through things
Hola este es un modelo diseñado como llavero para que los débiles visuales o personas con ceguera puedan clasificar monedas mexicanas de 1, 2, 5, y 10 pesos, lo imprimí con PLA, 0.16mm y generador de paredes clásico un relleno de 10% es…
These are the CAD models for the Zimaboard enclosure, featured on the Magmabow youtube channel. Manufacturing details Bezel: CNCed 6061 Aluminum, powder coated white Body: CNCed 6061 Aluminum, powder coated white Back plate: CNCed 6061…
Print duration: 5h 25m Material consumption: 54.01g / 11.11m Rafts: Doesn't Matter, ideal No Supports: Yes Resolution: 0.2 Infill: 15 - 20% Filament brand: Any Filament color: Any Filament material: PLA
A small color tag for your nasal spray bottles. Useful in this flue ridden time so you and your family members don't switch it up accidentally. I used PETG so it snaps on nicely.
My Panasonic NN-ST46KB microwave instructions say it should be at least 10 cm from the wall behind it, for sufficient airflow. But it’s so light that it slides backwards when I press the door-release button. A pair of these spacers slot…
I printed it in TPU with the bottom of the side walls facing down so only supports under the mounting holes are needed. the two caps are there to fully secure the module in place. First insert the module in the main part and plug it, then…
Panasonic DMC ZS60/TZ80 has a very poor wind protection and when a wind appears, you cannot hear what people say in the video. I didn't want to glue foam directly on the camera so I made this removable adapter. The foam is glued inside…
A printable replacement for the UniFi M.2 SSD Tray (UACC-SSD-Tray) Ubiquiti uses the same tray across UCG Max/Fiber and UNAS Pro 4/Pro 8/UNAS 4, so this should fit those bays too - tested in a UNAS Pro 4 (SSD detected). SSD SIZES 2242 /…
My wooden gymnastics ring hang off my Rogue pull-up bar. I wanted some place to store them so they are out of the way when not in use. This hook press fits on to the end of the bar and provides a sturdy hook for the rings. PLA would work,…
Un semplice ricambio per il mio dispenser di nastro adesivo. Lo pubblico perchè può essere utile a qualcuno in quanto le dimensioni sono standard. Se ti piace questo modello, lascia un Boost : è un piccolo gesto che aiuta a far crescere…
Version 2.0 Update: totally redesigned threads created in AutoCAD and test fitted to several commercial painter poles. This version also includes guy-line tie down attachment points. I've included an STL of just the threads if you need…
(Fast) Schraubenloses NAS-Gehäuse für das ZimaBlade. Steckbares Gehäuse für das ZimaBlade und zwei 2,5“ SSDs/HDDs. Gedruckt in PETG. 8 Schrauben M3 x 5mm für die SSD/HDD-Trays werden benötig.
porta cortinas hecho en fusion360
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
A re-uploaded model from NASA 3D Resources of a 1U CubeSat. CubeSats are a type of nanosatellite that come in a variety of sizes, with the standard size being 10 centimeters by 10 centimeters by 10 centimeters, or 1U. CubeSats are small,…
Ich habe mir auf Amazon einen kleinen Mülleimer fürs Badezimmer gekauft, den man an der Wand befestigen kann. Der Deckel öffnet sich mit einer Feder, wenn man einen Hebel herunterdrückt. Leider war die Arretierungsnase, die den Deckel…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
With this extended battery for the Lumix LX-15 camera you can shoot up to 6 hours! All models are available in both stl and 3mf formats, in the latter everything is placed in the bed in the best position for printing. Print settings:…
Cortador de galletas con diseño de navidad, son dos piezas cortador y marcador se imprime junto. Para no perder detalles marcar opcion aracne.
In my case, I managed to print the Dodecathleon flower pot from the second attempt, after I added the improvements I mentioned in the model description and rotated the model a bit so there were no strictly horizontal planes. See the photo…
This is a quick and functional 3D reconstruction of the mouthpiece for the Katarek Travel nasal aspirator. I reverse-engineered the design by measuring the original mouthpiece and translating it into a 3D model using Fusion 360. The model…
The Technast Magical Text is designed to captivate and illuminate any space. This model features intricate details and is optimized for glow-in-the-dark printing. It's perfect for creating eye-catching signage or decorative elements that…
The Immortal T placement is not optimal if it's the only antenna you have on the quad, I use it because I use a diversity receiver with 2 antennas. This mount works well if you have U.FL to SMA adapters to attach your antennas for the air…
Wall holder for DECT coldress phone Panasonic KX-TG6821. STEP file included. Designed for line width 0.5mm (holder's walls width is 2mm, so 4 lines in wall). Infill does not really matter as it is only somewhere in the bottom. OrcaSlicer…
Servus, Mache aus 2 Nass- und Trockensaugern Einen. Ein Adapter für einen Einhell Nass- und Trockensauger mit flexiblen Kärcher Nass- und Trockensauger WD Saugschlauch. Der original Einhell Nass- und Trockensauger hat so einen harten…
Now available with front air intake as well! The file called FRONT_AIR_INTAKE_VERSION_drive_bay_1_2_3_4 can be printed instead of the original drivebay. (See pictures for example) This project is designed specifically to be compatible…
Multicolor, circular NASA logo ( SVG source ). I took the SVG from Wikipedia and created a 3D model from it in Fusion 360. The .3MF file contains ~60 bodies for each part, although the entire thing can be printed in one go (though, that's…
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
Add a touch of fun and personality to your Ninebot helmet with these 3D-printed "bug" antennas! Designed for flexibility and durability, these antennas are printed in PETG filament and easily attach to the top of your helmet. Whether…
Since I keep my hardware in an IKEA Kallax shelf behind a door it get's quite warm in summer. To not damage the hardware I designed a heat tunnel / heat pipe for any 80mm fan that can be just glued into the top right corner. The fan will…
NASA Explorer Satellite Printable Board Game Scale Space Race Micro Miniature
Print in TPU with supports from build plate only. no supports from the cleats on the bottom you can see they have a 45 degree angle to make printing easier Category: R/C Vehicles
i'm always tinkering with something and lately i've been making parts for myself and friends for the catalyst super slam nasty racing frame. fixed angle cam mounts. flip stick mount and a rear mount that holds vtx antenna, rxsr receiver…
Wall mount for Panasonic ES-LT2B shaver (could also be used with models ES-LT4B or similar, but I have not tested with those). You can attach it to the wall using two sided sticky tape or 2 screws (distance between screws - 30mm) STEP…
Overview: This is a modular 3D printable HDD/SSD bracket designed for NAS servers and DIY storage setups. The frame is printed in PLA, while flexible TPU sliders hold drives securely in place and reduce vibrations. TPU dampeners can also…
Nassfutter Schaber für Katzenfutter zum ausquetschen, in 2 Grössen. Schlitzbreite 2mm und 1,25mm. Funktionieren aber beide perfekt.
This design allow you to print the case in parts and assemble it together using 200mm long 2020 extruded aluminum rails and t-nuts. It fits ITX motherboard Flex PSU 4 -- 3.5" hard drives 1 -- 2.5" hard drive/SSD 200mm fan using 154mm x…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
Scale down to desired size in slicer. I i think the picture is around 45 percent size. I printed mine in black and then acrylic painted it in silver and touched it up with sharpie for the text. However, you could use silver filament if…
A replacement door latch arm for your Panasonic microwave. Mine is a "the genius Prestige" model #NN-SN797S built in March 2013. The two guide pins on my latch arm broke as shown in the photo. Print Instructions: PETG is recommended. PLA…
Mat for a gymnastic ball with a diameter of 65cm. Podložka pod gymnastický balón o průměru 65cm.
This replacement back plate for the Aoostar Wtrt Pro takes on the 120 mm fan and two wifi antennas.
3D printable topographic miniature of Nassau - 🇧🇸 Bahamas Capture the beauty of Nassau 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 25.080, -77.334 (LatLng) .…
The original did not fit the UNAS Pro 8. This modification worked for me.
The raspi wasn't staying put, so thisanchor will help prevent any movement from the NAS being moved, shaked or whatever ^^ Also added a Solidworks assembly's export, so you can also test colors if you need it ! Any filament seems good.…
Note, unlike other designers I want to make sure this model is easy to modify to your model, so I upload with the fusion file instead of the mesh stl which I personally hate to use. Want to support further development of models and useful…
Sin Excusas es un soporte magnético para toalla de gimnasio , funcional y motivador, diseñado para mantener tu toalla siempre visible, limpia y al alcance durante el entrenamiento. El modelo está optimizado para impresión 3D , con…
Fits: ITX motherboard Flex PSU 5 -- 3.5" hard drives 200mm fan using 154mm x 154mm or 170mm x 170mm mounting PVC intake filter mesh 70mm cpu cooler with fan 3 piece design uses M3 brass heat inserts and M3 screws for assembly. Designed…
Tray and handle are printed from PETG. Models require supports. Automatic or custom supports can be used. To use custom supports, import the main STL file into the slicer with the STL file for the supports as a single model of parts.…
In a rush? Hate reading instructions and want to get down to it? You need to the base, shade, and lid. The two rings are optional for free rotation of the shade while keeping the power cord to the back. Each piece is properly oriented for…
Inosuke s Dual Serrated Nichirin Katanas for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in 2 Parts, no supports required. Glue is optional. Make sure you use Arachne Wall Gen or have detect thin walls enabled. All my…
This enclosure was designed to hold a toroidal balun or transformer for matching to a transmitting antenna. It was designed around the 61mm cores. There are two versions - one with SO-239 connectors on each end, and one with an SO-239 and…
Unifi UNAS-2 2.5 Solid State Drive Adapter Caddy Designed for SSDs 7mm thick. You will need 2 M3x4 SHCS bolts per drive. Pay attention to make sure your connector orientation is correct when mounting drive. If you need something for a…
