IKEA Kallax Heat Pipe for cooling fan for Synology NAS and Fritz Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling pipe for IKEA Kallax shelf door to cool down compartment (with my Synology DiskStation and FritzBox)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I keep my hardware in an IKEA Kallax shelf behind a door it get's quite warm in summer. To not damage the hardware I designed a heat tunnel / heat pipe for any 80mm fan that can be just glued into the top right corner.
The fan will suck in warm air and blow it out through the handle opening. New and cooler air is coming in from the backside.
It helped get a temperature drop of about 5 °C
I printed it in 0.2mm Res and PETG. As long as you use it in an environment <50°C you can also print it in PLA and be fine.
To have a better airflow within the cabinet I put my FritzBox on a raiser platform: https://www.printables.com/model/1342585-fritz-box-7530-ax-raiser