Panasonic GH4 Camera Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cheese grate camera cage for the Panasonic GH4.https://www.thingiverse.com/thing:1691475 was the inspiration…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cheese grate camera cage for the Panasonic GH4.
https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch.
This cage has a proper hotshoe catch to completely lock the camera in position.
You'll need to use a drill to ream the holes to proper tap spec for 1/4" and 3/8" taps. If you print with PETG or ABS, and drill then tap each hole, there's more than enough grip to use them without brass inserts.
I printed this with 85% infill and 3 perimeters with PETG to produce an essentially solid part.
Print Settings
Printer:
RigidbotBig
Rafts:
No
No
Resolution:
.2mm
85%
Post-Printing
Step 1 - Ream Holes
Using a #7 drill bit for the 1/4 holes, ream out all holes with this bit. For the 3/8" holes, use a 5/16" drill bit.
Then use a SAE tap to tap the 1/4" and 3/8" holes as needed around the cheese grates
Category: Camera