Liczymy pasujące modele…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
With this extended battery for the Lumix LX-15 camera you can shoot up to 6 hours! All models are available in both stl and 3mf formats, in the latter everything is placed in the bed in the best position for printing. Print settings:…
Wall holder for DECT coldress phone Panasonic KX-TG6821. STEP file included. Designed for line width 0.5mm (holder's walls width is 2mm, so 4 lines in wall). Infill does not really matter as it is only somewhere in the bottom. OrcaSlicer…
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
Wall mount for Panasonic ES-LT2B shaver (could also be used with models ES-LT4B or similar, but I have not tested with those). You can attach it to the wall using two sided sticky tape or 2 screws (distance between screws - 30mm) STEP…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
A replacement door latch arm for your Panasonic microwave. Mine is a "the genius Prestige" model #NN-SN797S built in March 2013. The two guide pins on my latch arm broke as shown in the photo. Print Instructions: PETG is recommended. PLA…
I left out some details of the original part and made some parts bigger to make it compatible with my printer and to make it more stable. My first model looked exactly the same as the original and broke excatly the same way, so. But it…
The model is designed for the Panasonic DMR-EH50 DVD player controller.
It's a riser for Panasonic TV. Don't remember model. Inside dimenssions 255x18,5.
I just bought a new battery (DMW-BLK22) for my Panasonic GH5 camera. But it's not compatible with my old battery charger (which is made for DMW-BLF19 batteries). Pins of both batteries are compatible so I made an adapter to avoid buying a…
Cable holder originally designed for Panasonic 1760 production monitor - it's designed for BNC cables but will work with others as you can see. I've uploaded a left and right side version and they should also work on the 1710 monitor (and…
Please hit the like button if you find this model useful for you. Battery charger for Panasonic VW-VBJ10 -no glue required You will need: Pogo pins 6mm Charger module Li-ion TP4056 type-C Some wires
This particular print was printed for outdoor longevity using PA6-CF 3 Walls 10% Gyroid infill No Supports.
Contacts battery cover for Panasonic pro-sumer/professional camcorders. For smaller VW-VBD29 has a tighter fit, for AG-VBR59 slightly loose but it still holds. Print in PLA Print time about 8-9 minutes per piece
I have an Gorenje WA60085 washing machine, and spring that holds main drum broke which service guy replaced, but there was no original spring holder (it flew into the void :-) ). Washing machine worked but spring was squeaking during…
I made this strap mounted spare battery holder for my G85. It allows me to hold a spare battery on my strap when I am walking around. The battery has a snug fit, and is held in place with a small latch. The battery can be quickly removed…
Fits a bit loose to prevent ripping it off from the mounted surface.
Panasonic DMC ZS60/TZ80 has a very poor wind protection and when a wind appears, you cannot hear what people say in the video. I didn't want to glue foam directly on the camera so I made this removable adapter. The foam is glued inside…
Botón de Ren-sha para ordenadores Panasonic MSX , F1-AWSX f1-AWX , TurboR
Der Panasonics Rasierer ERGB 62 wurde leider ohne Ladeschale geliefert. Ladekabel kann einfach eingeklemmt werden, sodass man eine Ladeschale erhält. Sollte aber für die meisten Phillips Modelle passen aus der Serie. Variante 1 so wie auf…
Back Cover for Panasonic ET-DLE Projector Lenses. Ready to print with no supports. Only minimal bridging which every Printer should easily manage. (You can still use supports if you want of course) Should fit the Entire ET-DLE Lens range.…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
This is a holder for a Panasonic air conditioner remote. I have no idea what the remote type designation is, but if your remote looks like the one in the pictures, it should fit nicely. It will probably not fit any other type of remote,…
Uses M8 hardware for mounting and 1/4" to attach the camera. Needs to be printed in a heat resistant materiel, did mine in ABS might work also in PETG. Dampers and dust cover need to be printed in TPU. Here an example Panasonic GH2 with a…
I recently installed an ODE into my 3DO FZ-1 and wanted a simple way to migrate the USB thumb drive to the front. This is that, the bracket that screws into the front drive posts probably isn't needed because the fascia locks into the…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
With this extended battery for the Lumix LX-15 camera you can shoot up to 6 hours! All models are available in both stl and 3mf formats, in the latter everything is placed in the bed in the best position for printing. Print settings:…
Created a magnetic hex bit attachment for a Panasonic Drill Driver model EZ 9647 for easy attachment of commonly used ¼'' bits. No supports needed. Paused the print in Prusa slicer to add 6 x 6.3mmx5mm magnets. 12/17/2024 Added a v2…
Just a simple wall holder for the Panasonic multi-type remote, I attach mine to the wall with a command strip. Infill ~15%, whatever material. I did as low as .1 and as high as .3mm resolution, it's all the same. Print Settings Rafts:…
Rear Optic Cover for the Panasonic RQ35k Optics Guarantee fitting for: ET-D3LEW10 ET-D3LES20 ET-D3LET40 ET-D3LET30 Printed in Pla and has a good fitment (Press Fit)
Blu Ray Riser 25mm for DMP-BDT180 Panasonic Permettant de réhausser le lecteur Bluray de 25mm
[EN] - All-in-One Panasonic Lumix Accessory Organizer Keep your camera accessories secure and organized with this all-in-one Panasonic Lumix accessory organizer. Designed to hold DMW-BLE9 and DMW-BLG10 batteries, chargers, and SD cards,…
Print two of the clips to mount the CZ-TAW outside the case. Ideally, PETG or a similar slightly flexible filament should be used rather than PLA. Useful in tandem with the Heishamon V5 Enclosure . Onshape Link:…
designed specifically to hold the Panasonic BQ-CC17 battery charger
This is a cheese grate camera cage for the Panasonic GH4. https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch. This cage has a proper hotshoe catch to…
I 3D scanned my ARC5 and sculpted a wallmount holder around it. Print with support, see photo. I didn't spend the time designing something easy to print. There's a hole in the back, this fits a 12mm magnet, which can be held in place with…
Support pour tondeuse panasonic multishape pour 3 accessoires + le pinceau
A battery case for storing a pair of batteries. Three options to suit: BLX-1 for the Olympus OM-1 and OM-1 II BLH-1 for the Olympus E-M1 mk2 and mk3 DMW-BLK22 or DMW-BLF19 for the Panasonic G9 or G9 mk2. Uses a pair of 10x3mm magnet to…
Hooks for the diffusor and styling attachments of the Panasonic Hair Dryer EH-NA63
Hey! I just made this 3D model for mine lumix gh1. Previous owner had lost SD doors. This piece of metal is pain in the ass. This is my final version after lots of prototypes. I made it work almost out of the printer. It's possible to…
A small tray and basic stand that holds some of the moduls and shaver heads of the Panasonic Multishape system.
Wydrukowałem pionowo z podporami
Measurements are slightly over to fit perfectly printed with PLA. Not sure yet, but should fit Panasonic AW-UE150KEJ PTZ.
I didn't have the original to copy so drawn from scratch. Fits nicely and clips into place as expected. Supports the batteries from moving. Printed in PETG in the default orientation, ie on its side to give strength to the spring.…
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
Tampa protetora do ocular da Filmadora Panasonic x2000, veda poeira. Impressão indicada em TPU
This 3D model is designed to fit in place of the intake filter on FV-10VE1 and FV-10VEC1 Panasonic Intelli-Balance ERVs. It serves as a basis for creating a reusable filter, provided you have a larger upfront filter installed before the…
This is the bracket for the FlippyDrive Ethernet port (the old style with screw holes), for my Panasonic Q Backplates
I created this little hinge to help one of my wife's friend who needed his replaced and the replacements online were too expensive. This is v5 of the hinge and the friend was happy with it. It was for a Panasonic SL-N5 turntable. It was…
The knob model is very similar to the original and fits perfectly onto its shaft. I also made the knurls to rotate it better. You can print even without using supports
I hated the fact that I had to carry my Panasonic 45-175mm lens separate from my inspire 2 case (including the X5s camera) as there was just no place to put it inside the inspire's case rattling around inside the case during transport. so…
My Panasonic NN-ST46KB microwave instructions say it should be at least 10 cm from the wall behind it, for sufficient airflow. But it’s so light that it slides backwards when I press the door-release button. A pair of these spacers slot…
This part is a replacement for the Panasonic magnetic latch.
There is a left- and a right-handed version of the L shape. Reportedly works with Australian version too MakerWorld | Printables
Wall holder for DECT coldress phone Panasonic KX-TG6821. STEP file included. Designed for line width 0.5mm (holder's walls width is 2mm, so 4 lines in wall). Infill does not really matter as it is only somewhere in the bottom. OrcaSlicer…
Replacement corner bumpers for the cf-29. Print in tpu
Great for wall mounting the battery while charging. It has an opening for the charging port. Make sure to adjust the height of the top mount in such a way that it hits the handle. Use 4-5 perimeters for strenght. Enable supports. Minimal…
Holding the battery was “painful” so i created this holder. Fits on Panasonic Flyer T8 / C8 batteries
V5 is raised to allow mounting with flanged screws. Countersunk screws for V3.
Cage with horizontal and vertical L bracket for the Lumix S9 camera.
Might need a little sanding, mine fits. You can use it for some diy spare batteries or adapters.
Panasonic ER-GB80 Trimmer Holder (45mm diameter) - 1981831
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
My friend bought the Panasonic KXHBC-200 baby monitor camera to keep a close eye on his new noisy and generally demanding obligation. He found that while it was a good camera, but was not able to tilt down far enough to fully see into the…
Fits microwave model NN-SN661S and possibly others. Panasonic part # F82569Y00AP Printed just fine without supports on my printer, but your mileage may vary (see orientation in photo). (Probably would have “looked” nicer in a different…
This is exactly 1 and ¼ of volume measuring spoon for SD-YR2550 bread maker. For their 600g bread you need 1 and ¼ of yeast and I was tired by measuring it by eye twice. So I made exactly this volume measuring spoon (fill it to the top…
My Lumix GH4 was missing the eye piece and I mostly use finder when shooting. I wanted to have something that blocks most light and protects the finder lens from dirt/grease. Model consists of three pieces: Eye Piece - this is mandatory.…
This is the GBP Player shell for the Panasonic Q but you can use the original GBP player internals for the Q. I took inspiration from the original design from 0Cordo but couldn't work with the files in Sketchup Free Web so I started from…
top half of "pana-q-gbp-top-cut.3mf" without the Panasonic logo
An easier to print and assemble version of the top half of the Panasonic Q Game Boy Player “Screw Post 2 M2.stl” is optional, if you used a threaded insert for the eject lever post you can use this to avoid needing a spacer.
Description: This is a custom housing that lets you attach a standard GameCube Game Boy Player to the Panasonic Q! I originally tried printing this design by 0Cordo, but ran into issues with FDM printing as it's optimized for resin. So I…
A simple holder for two Panasonic DMW-BCM13 Batteries. It works with all the BCM13x battery series (BCM13E, BCM13P and so on), as the dimensions are the same. It's not really a remix, because I designed it from scratch on Onshape, but…
The HDMI bracket supplied in the Git just doesn't fit right on my support bracket with the PCB in place. The OG model raises the screws up a little too high and just doesn't engage the bracket, so I had to design a new bracket from…
A simple knob for the Panasonic EVEQDBRL416B rotary encoder. This encoder used to be available for a low price from Pollin (order no. 240313 ) and has a very unusual shape with a thick metal “axle” that could be used as a knob as-is, but…
Wall mount for Panasonic ES-LT2B shaver (could also be used with models ES-LT4B or similar, but I have not tested with those). You can attach it to the wall using two sided sticky tape or 2 screws (distance between screws - 30mm) STEP…
Several years ago, I found a Panasonic KX-W900 typewriter and I wanted to restore it. It had its platen roller knob missing, so it was complicated to roll some paper in it. I used FreeCAD to create a replacement knob, so it can fit into…
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design: As thin as possible to help in acheiving prime focus. Locking pin hole included to prevent unintentional release (and to prevent…
Hotshoe cover for a Panasonic camera with auxiliary port. Built it for my GX1, but should work on many others. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .3 Infill: NA Filament: Generic PLA+…
This is a lens hood for the Panasonic 42.5mm f.17 micro four thirds lens. The mount snaps in place like the real lens hood. It is a little tricky to take off the first time (just like the real ones) but loosens up pretty quickly. It isn't…
Install a 2.5" x 5" oval fan outlet like the one on the Panasonic WhisperValue to a 3" duct
Panasonic Aquarea T-CAP Split indoor unit electronics cover hinges were utter shit, they were broken when the unit arrived. I could see how thin plastic they were, so didn't nother asking for replacement hinges from manufacturer as they…
This model is for a Panasonic Desktop fan. Pull/Push this knob to engage/disengage oscillation.
This is a solid battery mod for the Panasonic Q so you can swap batteries easily when it dies. The current method to desolder the old battery and use a like-for-like replacement; that's not ideal cause the pads on these PCBs are beyond…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
EN: This is a minimalist, custom-fit wall mount for the Panasonic ES-LV67 shaver. The mount is available in an adhesive or screw-on version. The shaver slides into the holder from above and is held securely in place. To achieve this, I…
This is a wall mount for Panasonic WH-SDC05H3E5 heat pump thermostat and remote control. It has been designed to mount it to the wall via 2 M3 scews. Mounting holes have 60mm distance from each other vertically to enable mount over EU…
A replacement door latch arm for your Panasonic microwave. Mine is a "the genius Prestige" model #NN-SN797S built in March 2013. The two guide pins on my latch arm broke as shown in the photo. Print Instructions: PETG is recommended. PLA…
Just a trimmers holder with a port for recharge and 4x tooth brush holder, enjoy. Dimensions: Model hight=40 mm, 40 mm x 30 mm for the rectangle and 43.25 mm as diameter of cylinder.
Remix of Anachronism and Steves great HotShoe Cover, its a bit flatter to fit plane on the camera also ive added a small grip. I've printed it in glow in the dark pla (looks rly nice) with 0,15 layerheigt and 100% infill.
Easy print, no supports, no brim necessary. For best results - print it from waterproof material - f.e. ASA. Have fun!
Printable with PLA and PETG (the print in the photo was made with PETG). Settings: Infill density was set to 5% and the infill pattern to honeycomb; otherwise, the print was made with standard settings. I achieved a significantly better…
Details- https://www.reddit.com/r/cassetteculture/comments/1pyukrt/self_repair_project_writeup_and_how_i_repaired_my/
The original GH4 eyecup is a two piece design using a hard plastic base that clips onto the viewfinder and a softer rubber cushion. The plastic clip wasn't very sturdy; I lost mine when it slipped off the camera and I didn't notice until…
I recently installed motion and humidity activated Panasonic Whisper fans, but the motion range was too large for our bathroom that was right off our main hallway, causing it to activate any time someone walked by. These shields slide…
This is a belt clip I designed for my Panasonic RQ-J55 Cassette walkman! This thing is a Walkman, but doesn't include a belt clip! It was designed for use with a strap to hang from your body, but the one I bought did not come with the…
This is a simple remix of Dylan's Gridfinity Panasonic Eneloop BQ-CC55 UK charger adapted for the EU Plug
