1 / 1
Low Profile 1.25in Telescope Adapter for Micro Four-Thirds Cameras - Panasonic, Olympus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thin adapter to allow micro four-thrds camera bodies to be inserted into a 1.25in telescope eyepiece holder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design:
- As thin as possible to help in acheiving prime focus.
- Locking pin hole included to prevent unintentional release (and to prevent error messages about lens attachment).
- Modeled support material under camera mount ring tabs which are difficult to support in slicers.
It is intended to print with the camera body mount facing up to acheve the right tolerances for camera mounting. Use support on build plate only and be sure to remove the modeled support pieces under the mount ring tabs before attempting to mount your camera.