Liczymy pasujące modele…
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
This gear wheel fits perfectly to the chain with 3 mm balls for blinds. When first fitted to the engine shaft, the gear holds very firmly. I recommend that after the first time it is put on, you use a kitchen knife or spatula to pry it up…
The M433 Grenade in 2 different formats. A solid model and a container.Please feel free to rate and review.
Easy printable case for a 40% keyboard. Design can be printed on Prusa Mini. The design allows for easy alignment with filament as guides when gluing. Keyboard: bm43a PCB aluminium plate Akko CS Ocean Blue tactile switches (budget…
Introduce in 1943, the M43 Stielhandgranate (stick hand grenade) was put into combat to replace the 1924 model. With a head filled with dynamite, and a wooden hand for maximum throwing capability, this grenade reeked havoc on the…
MFT to Canon FD Adapter (customizable) This adapter allows you to mount Canon FD lenses on a Micro Four Thirds (MFT/M43) camera. The design consists of two parts that can be screwed together using 3x M3x10 screws. The holes are sized with…
In order to attach a camera to your Meade ETX telescope you need a T-adapter to the telescope and an adapter to your camera. If you are a M4/3 user this will be a cheap alternative to try out your telescope. Clear skies! Print Settings…
I designed this bookend showcasing a model of a 40mm M430A1 HEDP (high-explosive dual-purpose) grenade as a farewell gift for a Lieutenant Colonel who just ended his successful term commanding a battalion in the German Armed Forces. The…
Model of the factory cam alignment block for the BMW M70, M73, or M43 engine. Print two for the V12s. Make sure to dial in your printer/filament so that the holder fits snugly on the cam. Faces chamfered to reduce elephant foot, corners…
Gelochte Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera oder 50mm Leica Objektive mit M43 x 0,5 mm. Das Gewinde hat die Abmessung M43 x 0,5 mm. Drei verschiedene…
This is a raspberry pi HQ camera m43 adapter. The HQ camera circuit board screws on to the base (the 4 corner holes). You may need to take off the C/CS mount rings and other hardware for it to fit. Next, you screw on the lock ring all the…
i made one piece model and then cut it for 3 part's for those who have smaller printer's (like me). The middle one's tap's are little too short that it didn't stay on it's own. I used small cut's double side tape in the top corners to…
Metabones EF M43 T Speed Booster XL 0.64x cap is deeper than regular M43 cap.
Simple Gridfinity insert for Micro Four Thirds lenses.
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera. Gewinde M43 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
So, i bougth this broken Nikon D90 with this 28-80 lens. Obviously didn't fit on my older olympus e520 so i decided to make this adapter. Works pretty well but i think it need some fine adjustment since the infinity is focused but not…
The M430 HEDP is a 40mm high-velocity grenade widely used by the U.S. Military, primarily launched from the Mk 19 automatic grenade launcher . I created this 3D model to display with some U.S. military surplus M169 cartridge cases (used…
I bought the DJI version of the Panasonic-Leica 15 mm 1.7 Lens and wanted a lens hood. Its a third of the price of the lens, which i didnt want to spend. So I made my own and here it is. It turned out quite nice and I learned a little…
Klíč pro olejový filtr BMW motor M43
Micro four-thirds lens holder for the Gridfinity system.
Printed with PCTG 0,2mm layer, i believe PETG are good as well. If not, try to upscale a little.
I bought an AM43 a year ago. I didn't like the chain drive, so I made a direct drive. It's a lot quieter and the speed is better too. Easy to install, just two 4x40 or 3.5 x 40 mm screws. Printer: Prusa MK3S+ Material: PLA real (Temp: 200…
A box with magnetic clasp for M43 - 1.25" adapter rings. The hinge is completed with two hex head screws. Materials needed: 8 - 3x1 mm magnets 2 - M3x10 mm Hex head screws Onshape file here:…
The rubber part of the remote became unusable. Buttons were part of it. This model can be used as buttons replacement.
I accidently put a hole into the carburetor's diaphragm on my tiller when putting a new primer bulb on. I didn't realize until the engine kept flooding. So I went to Fusion360 to see if I could make a temporary diaphragm by tracing the…
I've left three different versions of the strap holder The differences are in the height and with of the holder 1 Is 6mm high, and has a width of 4,5mm 2. Is 5,5mm high, and has a width of 4,5mm 3 Is 5,5 mm high, and has a width of 5mm I…
I printed it with 30% infill so that the screw holes are a bit sturdier. Would probably work well with less since the mount is not exposed to a lot of stress/force. The bottom plate is a bit flimsy at 1mm thickness, but holds well and…
Ich habe diese Halterung erstellt um Newland FM430 Barracuda fixed Mount Scanner an der Vesa Halterung von Monitoren/ All-in-One PC montieren zu können. Montage vertikal, horizontal und 45° Winkeln möglich.
If you want to fix a Noctigon Meteor M43 Flashlight to a Gopro mount this is your adapter. I use it with a handlebar Gopro mount. the Velcro band is just for securing the flashlight and to avoid rattling noises Link to the Flashlight:…
Schachtel mit Deckel für fünf Filterdosen Modell https://www.printables.com/model/1121353-filterdose-43mm-filter-filterbox-fotofilterbox-pho ....................... Box with lid for five filter canisters, model…
Deckel mit M43 x 0,75 Gewinde zum Aufschrauben auf Objektive mit entsprechendem Gewinde. Zwei verschiedene Ausführungen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken. .................................... Cap with…
Snap-fit enclosure for the TI EVM430-FR6047 ultrasonic flow-metering EVM. STEP + FreeCAD source included.
So, i bougth this broken Nikon D90 with this 28-80 lens. Obviously didn't fit on my older olympus e520 so i decided to make this adapter. Works pretty well but i think it need some fine adjustment since the infinity is focused but not…
Schachtel mit Deckel für fünf Filterdosen Modell https://www.printables.com/model/1121353-filterdose-43mm-filter-filterbox-fotofilterbox-pho ....................... Box with lid for five filter canisters, model…
V1 whole model of Shamad, a Seastream43' ketch. more details to come.
I had some time and saw someone needed a case for the BM430A, so I put this together. It’s a simple 3D-printed case designed to fit the KPRepublic BM430A, though I haven’t tested it yet. If you print it, let me know how it works!
Printed in PLA with tree supports (they may or may not be necessary) with the hole facing upwards. This works on ball chains of the same dimensions as the original, I just couldn't for the life of me get that one to fit onto the metal bar…
This is a custom gear for my AM43 blind drivers. I had been using the supplied generic beaded chain gear, but found them a little noisy. These are much quieter as they exactly mesh with the beaded chain. My blinds are moved with a…
Printed in white PLA with 0.2mm layer height. Pause the print at layer 21 to insert a 6mm X 2mm magnet - make sure you have the correct pole facing up. Update 26/02/21 I've only just realised I uploaded the model without space for the…
not tested yet, its first my model :) Bead diam. - 3.2 mm Pitch between balls ~3.8 mm kit from: https://www.moeshouse.com/collections/chain-roller-blinds-motor or https://www.banggood.com/search/moeshouse-cm-ls.html Category: 3D Printer…
