1 / 1
Low Profile 1.25in Telescope Adapter for Micro Four-Thirds Cameras - Panasonic, Olympus
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin adapter to allow micro four-thrds camera bodies to be inserted into a 1.25in telescope eyepiece holder
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design:
- As thin as possible to help in acheiving prime focus.
- Locking pin hole included to prevent unintentional release (and to prevent error messages about lens attachment).
- Modeled support material under camera mount ring tabs which are difficult to support in slicers.
It is intended to print with the camera body mount facing up to acheve the right tolerances for camera mounting. Use support on build plate only and be sure to remove the modeled support pieces under the mount ring tabs before attempting to mount your camera.