Counting matching models…
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Design Background: I needed a USB hub for 10 USB drives, 5 SD cards and about 10 Micro SD cards. I searched for one that fit my needs but couldn't find a perfect one. The designs online either had excess number of slots or had a shortage…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
I remixed this to handle a small variety of storage needs in a smaller space. Printed in 15% infill PLA with no supports.
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
A compact USB, SD-card and Micro-SD-card holder. The included 3mf and gcode files use Prusa Slicer's “height range modifier” feature to get 0.2mm layer height from 0-13mm then it changes to 0.1mm layer height from 13-17mm. This produces a…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant
Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
Micrometer Stand To use your micrometer properly , you need to put it on a stand, so you have one hand for the screw and one to hold the object to measure! Works best if the handle of your micrometer is about 11-16mm thick ! Additional…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Holder for anything with square shape. Parameters SD Card: sdNumber = 12; sdWidth = 24.5; sdThickness = 2.4; thickness = 3; baseHeight = 0.4; height = 9; dispersion = 6; Parameters Micro SD Card: sdNumber = 12; sdWidth = 11.5; sdThickness…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
A simple, quick-to-print design, borne of the necessity to afford a modicum of protection to this hardworking educational tool in its travels to and from school. Plus, who wouldn't want a Micro:Bit on their fridge or whiteboard? Design…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Printable Micro Uzi from GTA San Andreas. Texture wrap in the .zip file. Before printing the texture, measure your model in case you changed the size. (so if you print at say 75% of the file size, scale down the texture down to 75% as well.
Print approx. €9.59–€11.72 excl. taxPreliminary estimate for one variant
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
here are some covers for the most common USB connectors, easy and quick to print, they are ideal for protecting cables and keys from dust, they are equipped with a ring to facilitate their removal and also to be used as a key ring or to…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
microbit case with integrated breadboard. For small tinker projects or if you just want to quickly test something out. What you need in addition - a micro:bit GPIO Expansion Board I have also posted a version for the Raspberry 3 and 4.…
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for PETGSource material: PET
See https://www.printables.com/model/220369-magnetic-bit-kit for details, this just adjusts the magnet pockets on the case for 6x2mm magnets.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Using a laser pointer (preferably green since it is more powerful) and a disposable syringe, it is possible to build, in a very simple way, a microscope of approximately x1000 magnification, with which microorganisms can be observed in a…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
These are just my gcode files to implement into your slicing profile. I cannot upload the full end gcode as printables does not let me so just put the gcode line i wrote into it under the “park print head” line. It retracts 13mm after…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
I made this protractor to have a better understanding of which angle my Hwayeh MG90S micro servo points in with regard to the applied PWM signal from the microcontroller. The servo I have is quite similar to a standard 9G servo, but not…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
The original case was too shallow for my micrometer, as well as being just slightly too short. Aside from extending the depth and length, I also modified a small amount of the shaping around the micrometer and changed the space for the…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
allows you to use your Proxxon Micromot 50/E as spindle for the Alfawise C10 engraving machine. The adapter has a 45mm outside diameter and might also fit other engravers. There are two adapters which can be used independently. One mounts…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Turn your workbench into a professional station! This multifunctional 3D stand is perfect for installing threaded inserts, soldering work, and micro-drilling. Ideal for those who want practicality, organization, and a flawless finish in…
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
Included is some gcode used to print, 2 STLs one with & one without the signature & a step file as well. Recommeded settings are: 0.2mm layer height Print with supports - organic on the baseplate Print using PETG Use 50% infill, honeycomb…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
These are display models of Musellifer profundus Vivier 1974, a deep-sea gastrotrich. This worm is frequently encountered in the vast plains of the ocean bottom, from shallow coastal waters to the deepest depths. Members of this species…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
You can to use cotton wool to fix micro:bit i case, rather than use glue or scaling down the size of the case.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
Carcasa para Microbit con el personale de Yoda. Ideal para la programación de la tarjeta Microbit como mascota interactiva.
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant
Hier ein Halter für das Wera Micro-Bit-System. Die Bits werden magnetisch auf ihrem Platz gehalten und im unteren Teil ist noch eine kleine Ablage integriert wo kleine Schrauben abgelegt und ebenfalls magnetisch festgehalten werden. So…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for PETGSource material: PET
FR La micro griffe est un ouvre colis de dépannage Rapide, facile, ultraléger, économique. Il n'est pas fait pour ouvrir des dizaines de colis à la suite, pour ça il est préférable de le faire en métal. Il est là pour vous dépanner quand…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I had to fix my microphone stand. I recycled the threaded insert for the rotating part and used an M8 nut for the vertical mounting part.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
I finally tried out my 0.2mm nozzle and made a fidget ring for it. This one is all-day wearable just like a normal ring - at least I found it to be; it does have quite some thickness, and you might find that still comfortable or not. If…
this isn't mine and this is my first reupload so if I have broken rules or etiquette please let me know :) I just wanted to reshare to get the hang of it and honor this great print that I'm yet to print in marble sadly. everything is the…
I created a USB, SD card and Micro SD card storage holder for my Honeycomb storge wall. I recently made a version 2 of the stl file. I made a couple of changes to the SD card opening so the cards would fit better. I also made the depth of…
This stand/holder contains 4 different slots: 3x SD-Card 6x Micro-SD 9x USB-A 12x USB-C Print Settings: Matte PLA 210 degree print temp 60 degree bed temp 0.4 Nozzle 0.12mm Layer Height
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
VW T1 Bus Pickup Pen / Desk Organizer USB SD microsd
How about using the popular micro:bit to make a Otto robot? this is how this robot came to life combining to great platforms and adding more articulations to create a new member of the Otto family. This a remix of the original Otto robot…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
Holds: 7 (+ 4) MicroSD Cards 4 Standard SD Cards up to 9 USB-A Memory Sticks depending on size 90 degrees, angled or mixed configuration Added files for another version that also supporting USB-C this second version holds: 7 (+ 4) MicroSD…
Welcome to my happy mistake the MIN Micro Delta 3D printer. I set out to design a 120mm build area mini delta 3D printer and well mistakes were made. The printer frame ended up too small but turned out really cool. Specs: 70mm x 95mm…
3D-Printed Micro Sanding Blocks – Precision in the Smallest Details When it comes to fine detail work, every millimeter matters. Tiny edges, intricate curves, or delicate engravings can be difficult to refine with traditional tools.…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
Hello, this is a holder for 2 micro SD cards that can be attached to a keychain. The holder snaps into place easily and is then securely closed. The tab on the side has a snall notch to make it easier to open the holder again. I tried to…
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32. You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs. Simply connect the two modules…
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
Weighing in at 7g of filament and holding three micro SD cards, this little case is easily portable and very convenient to have on hand. The micro SD cards fit snuggly and the threads are buttery smooth (for me at least, your mileage may…
It's my “quick and dirty” Tinkercad remix of the great original design by rayjizza: https://www.printables.com/model/20112-gamer-case-for-bbc-microbit The case is now compatible with BBC micro:bit v2 (and v1 as well). The layout of…
A minimal open-frame case for Micro-ATX motherboards. Designed to serve as the base for hardware testing rigs as seen here: It should be compatible with any Micro-ATX motherboard and SFX PSU. The ones in the photo are: Gigabyte B760M DS3H…
MAJOR UPDATE: Long reach Pliers V3 This update makes the pliers print more easy then ever! No more fettling... However you now need a small M3 countersunk bolt and a normal or nylock nut. Note If you don't have (or don't want to add) an…
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
A floppy disk that can hold up to 1 TB. https://www.youtube.com/watch?v=nez5D-GYKAo&ab_channel=Dehapro
I created a remix for this project: https://www.printables.com/de/model/62043-rgb-double-helix-lamp-easyprint I have add a USB-Micro PCB Socket, because I wanted to save myself the cost of an extra power supply. You can buy the Sockets…
I don't have or use the larger SD cards, haven't for a while so didn't want all the extra space taken for them. I removed them and made the box a little smaller to just hold Micro SD cards. Remixed from…
Hier sind meine gridfinity bin für Speichermedien sowohl für alle Typen ein als auch einer wo alle vorhanden sind wenn man von einer Kategorie nicht soviel hat
You can fit the MicroBit Board alone or the "GAMER case for BBC MICROBIT" Download it here: https://www.prusaprinters.org/prints/20112-gamer-case-for-bbc-microbit It also has compartiments for: USB Cable Battery Print instructions No…
Reupload from Thingiverse. Small and fast print that demonstrates common 3D printing defects. I recommend printing in opaque filament at 0.15mm layer height for optimal overhang performance with a 0.4mm nozzle. This test contains :…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
I was looking for some micro linear actuators for my new project, yes, I found some, but $60 each! Excuse me! So, this is it! About $3 each! BOM (100mm without limit switch) 1 x N20 gearbox (3mm D shaft length 5mm) 1 x M4 locknut 1 x M4 x…
About the F-5E Tiger II The Northrop F-5 is a family of supersonic light fighter aircraft initially designed as a privately funded project in the late 1950s by Northrop Corporation. There are two main models: the original F-5A and F-5B…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
This is a remix of "Question Block Nintendo Switch Game Cartridge/Micro SD Card Holder" by Elitecgi that's over on thingiverse . I changed it so that the center of the block is it's own part. This way, you can take my card holder model…
I found that the STL's Creality provided for mounting the accelerometer packaged with their Creality Sonic Pad would not work with a Micro Swiss NG so created one. With very little area on the NG for a mount to work, I chose to utilize…
Microsoft published this tweet saying it might be back on Office replacing the paperclip emoji. My Print: Supports: Yes Layer heigh: variable between 0.1 and 0.2 (PrusaSlicer option) Scale: 64% (10 cm tall) clippy-complete.stl can be…
This is a universal microcontroller adapter for my modular microcontroller and breadboard holder . https://www.printables.com/model/1041973 It should be able to hold almost any microcontroller out there. If you find one that doesn't fit,…
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
Holes in the bottom allow access to micro USB and battery connection, as well as a hole to push the battery out, but there is no access to the reset button without simply removing the micro:bit.
The Microbit v2 comes with a very clever cardboard battery holder that you have to fold. I replicated the original design and made a couple of variations, including the Animal (which loosely resembles a racoon). Important : this model has…
Use your phone or tablet together with your laptop as a second screen. Can be stretched/shortened to fit laptops of different sizes. Print profiles included. Differences between versions: Macbook version - use this version if you have a…
Micro:bit holder, remixed to hold 10 micro:bits instead of 20.
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
Tilted stand for better work w/ micro:bit Nakloněný stojánek pro lepší práci s micro:bit
Laptop chargers are always a hassle. This add-on for the Surface's charger makes managing the wires easier. Everything is printed in place. Tested with 0.4mm nozzle and 0.2 layer height. It is my first print in place design, so I'm not…
This is a model of the standard Micro Four Thirds lens mount. This is the male portion of the mount that is attached to the rear of a Micro Four Thirds lens. Dimensions were taken from the lumix G Vario 45-200mm f4-5.6 lens mount,…
This adapter allows you to use a m42 lens on your micro four third camera. Infinite focus saved with this adapter
Action Army AAP01 Micro Dot Mount Distance Between Holes = 19 mm Hardware needed: Original Screws Of AAP01 And Micro Dot
Designed a wall mount to fit the Dell Optiplex Micro PC that I recently got. My network setup is pretty limited where I live, and having space to run everything I want is even more limited. The only wired internet I can currently run is…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
If you're anything like me you have more than 1 SD card laying around on your desk. This Modular and Discrete SD/MicroSD card Case allows you to neatly package away your cards, leaving them neatly for when you need them next Super easy to…
I found the height of the QuadCast on the stand to get in the way of my monitors. This makes the overall height much lower, and allows for more clearance under the stand if you want to bring it forward under your keyboard. Uses all the…
A common computer mouse part that breaks is the scroll wheel axle. Initially, I tried printing a replacement out of curiosity but its actually more practical than I thought it is. The SW17 and stl files for the Microsoft 1850 mouse are…
Table mount for the micro converter bidirectional from blackmagic. It fits the 3G and 12G version. Fits table with a 7cm thickness. Holds two converters.
The Surface Pro 2017 Pen does not have a shirt-pocket clip so I designed one with OnShape . More info about the new Surface Pen in the Pen FAQ Notes: I printed in PLA which is not very durable for such a small item unless you anneal in an…
Hi, this is small travel box for 16 microSD cards. The microSD on the lid is printed separately and glued. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20% Filament: Plastika…
10This is a mount for the Surface Pro 9 that secures it with elastic cord (bungee) across all four corners and uses elastic to pull all four arms tight around the Surface. Other tablets might also fit that share similar dimensions. The…
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier) There are two versions with E3D logo and without it. Support enforses stl-file…
I recreated the shock mount that I currently have. It should be good enough to print with supports. I will probably create a 3D printing friendly one that does not need supports. You will also need a elastic band to connect the two…
PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Very useful mini cutting table can use to cut PCB boards. The table can be connected to a vacuum cleaner. Use a 40mm diamond disc for cutting The model consists of 3 parts,…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
