Prusa MINI E3D Micro REVO/TriangleLab CHC MINI hotend with M3 heat set inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of an original E3D design to fit M3 heat set inserts
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 202
- Makes
- 9
- Views
- 1,939
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier)
There are two versions with E3D logo and without it.
Support enforses stl-file is the same as in original design. Just add it to put all you need to print in one place. No need other supports.
UPD: add rev2 with heat set insert for cable clamp (size of the heatset insert - M3xD4.6xL8)
Also add a version with the same honeycomb patter as in my version of front and rear panels ( https://www.printables.com/model/194982 ).
All versions available in *.step
UPD 20.02.2024 rev3: In rev2 there were two different sizes of heatset inserts - 4.6mm and 5.0mm diameter. Now there is one dimention of all holes for inserts - 4.25mm for M3x4.6x5 heat set inserts.