Prusa MINI E3D Micro REVO/TriangleLab CHC MINI hotend with M3 heat set inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of an original E3D design to fit M3 heat set inserts
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 202
- Wydruki
- 9
- Wyświetlenia
- 1938
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another supplier)
There are two versions with E3D logo and without it.
Support enforses stl-file is the same as in original design. Just add it to put all you need to print in one place. No need other supports.
UPD: add rev2 with heat set insert for cable clamp (size of the heatset insert - M3xD4.6xL8)
Also add a version with the same honeycomb patter as in my version of front and rear panels ( https://www.printables.com/model/194982 ).
All versions available in *.step
UPD 20.02.2024 rev3: In rev2 there were two different sizes of heatset inserts - 4.6mm and 5.0mm diameter. Now there is one dimention of all holes for inserts - 4.25mm for M3x4.6x5 heat set inserts.