25mm Micrometre case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hard case for my unbranded 25mm micrometer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 60
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The original case was too shallow for my micrometer, as well as being just slightly too short. Aside from extending the depth and length, I also modified a small amount of the shaping around the micrometer and changed the space for the wrench, as mine is 75mm long and i did not want it “flapping” around too much.
I made these changes to the original “Print In Place” model, and split it into separate shell halves. The separated version is what i printed and used a 3.2mm mild steel rod for the hinge. I printed this on my Creality CR-X with a 0.6mm nozzle at 0.4mm layer height.