Panasonic Q - spindle magnet adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
tiny model which allows you to use common small magnets as a circular magnet (used on the Panasonic-Q spindle)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 691
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
As this is a tiny model, you'll want to use a resin printer (or order through a service like PCBway/JLCpcb) for accuracy.
you need 8 small 3x1mm magnets (neodymium N52).
Make sure all magnets are oriented the proper way. You can press-fit them in, or use a bit of glue to secure them. Then when placing the adapter/assembly on the spindle, you may have to file it down slightly for a perfect fit (don't put too much pressure to get it to fit, as you'll likely break it). For orientation, You can go either way, I prefer “logo up”, just so the magnets cant escape on their own :)