Panasonic Q - spindle magnet adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
tiny model which allows you to use common small magnets as a circular magnet (used on the Panasonic-Q spindle)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 120
- Makes
- 0
- Views
- 691
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
As this is a tiny model, you'll want to use a resin printer (or order through a service like PCBway/JLCpcb) for accuracy.
you need 8 small 3x1mm magnets (neodymium N52).
Make sure all magnets are oriented the proper way. You can press-fit them in, or use a bit of glue to secure them. Then when placing the adapter/assembly on the spindle, you may have to file it down slightly for a perfect fit (don't put too much pressure to get it to fit, as you'll likely break it). For orientation, You can go either way, I prefer “logo up”, just so the magnets cant escape on their own :)