1 / 10
Scalable Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens — zdjęcie 1
1 / 10

Scalable Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens This lens hood fits Panasonic / Olympus 4/3rds lenses with…

Ocena
0 / 5
Polubienia
4
Pobrania
61
Wydruki
0
Wyświetlenia
576
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
GNU General Public License v2.0

Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens

This lens hood fits Panasonic / Olympus 4/3rds lenses with bayonet hood mount.

To put the lens hood on, squeeze the hood opposite the ears.

The lens hood stays in place because of the springiness of the

plastic.

Notes:

  1. DO NOT FORCE THE HOOD ON THE LENS TO MODIFY THE EARS. YOU WILL DAMAGE THE LENSE/CAMERA!

  2. The hood's ears can be made thicker/thinner by adjusting the Z parameter in cura.

  3. The hood's ears can be made thinner by sanding the small opening surface.

  4. The hood is rough and will need to be sanded and trimmed.

  5. Use a brim, NOT a raft or similar (or you will have to sand off the raft).

  6. The stl has been fixed to be resized in cura to fit other Panasonic Lumix/Olympus 4/3s lenses.

  7. Spraying it with flat black paint helps reduce glare

Barrel diameter for this lens: 49.3 mm

Lens Mounting Slot Thickness: 1.6 mm (approx)

Based on https://www.thingiverse.com/thing:39722

Lens hood for Zuiko 14-42 MSC II R lens Aµ4/3

by babr December 31, 2012

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

10%

Filament: eSun PLA+ Black


Notes:

Ender 3 Pro
Bed 66C

End 220C

Brim (not raft)

Post-Printing

To avoid warping, allow it to cool before removing from bed.

Category: Camera

Tagi