Heishamon (OT) enclosure (Panasonic heatpump)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Heishamon controller, based on Rebirama design on Thingiverse
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an enclosure for the HeishaMon communication PCB from TheHogNL, used to control or monitor your Panasonic Heatpump.
I really liked the original design and the feature of pressable buttons was really nicely implemented, but it didn't fit the new standard PCB with Opentherm support. Therefor I alter the design and made it work.
- Github for Heishamon.
- Heishamon PCB at Tindie.
- Original design on Thingiverse.
Here you will only find the lid and the enclosure, the pins en pin-holders you need to download from the original design over here, as I did not alter them.
The lid can be printed with or without support, the embossing is only 0,6mm deep. The openings can. be easily cut away according to your cabling needs.