4 Bay ITX NAS Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 Bay ITX NAS case assembled using 2020 extruded aluminum, Flex PSU, and 200mm fan.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 1232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design allow you to print the case in parts and assemble it together using 200mm long 2020 extruded aluminum rails and t-nuts.
It fits
ITX motherboard
Flex PSU
4 -- 3.5" hard drives
1 -- 2.5" hard drive/SSD
200mm fan using 154mm x 154mm or 170mm x 170mm mounting
PVC intake filter mesh
Designed for and printed using a Creality CR10-V3 with a .8mm nozzle and .6mm layer height.
No supports required when printed in file orientation
- Using Cura 5.9.1
- PETG Filament
- Layer Height: .6mm
- Initial Layer Height: .38mm
- Line Width: .8mm
- Wall Thickness: .8mm
- Wall Line Count: 2
- Top Thickness: 1.2mm
- Top Layers: 2
- Bottom Thickness: 1.2mm
- Bottom Layers: 2
- Infill: 30%
- Print Temp: 240C
- Build Plate: 80C
- Print Speed: 60mm/s
Using settings above with .8mm nozzle
- Test Print ~ 18 minutes —11 grams
- Front Cover ~ 3 hours 42 minutes — 159 grams
- Back Cover ~ 3 hours 34 minutes —138 grams
- Motherboard/Hard Drive Frame ~ 4 hours 9 minutes — 162 grams
- Filter Frame ~ 1 hour 7 minutes — 40 grams
- Top Panel ~1 hour 59 minutes — 85 grams
- Bottom Panel ~ 2 hours 50 minutes — 115 grams
- Left Panel ~ 2 hours 34 minutes — 114 grams
- Right Panel ~ 2 hours 24 minutes — 107 grams
- Hard Drive retaining bracket ~ 15 minutes — 11 grams
Total about 18 hours 52 minutes and 942 grams of filament