M.2 NVMe SSD Tray for UniFi UNAS Pro 4 / UCG Max (2242–22110)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable M.2 SSD tray for UniFi UNAS Pro 4 & UCG Max.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
A printable replacement for the UniFi M.2 SSD Tray (UACC-SSD-Tray) Ubiquiti uses the same tray across UCG Max/Fiber and UNAS Pro 4/Pro 8/UNAS 4, so this should fit those bays too - tested in a UNAS Pro 4 (SSD detected).
SSD SIZES 2242 / 2260 / 2280 / 22110.
PRINT SETTINGS (tested on Elegoo Centauri Carbon)
- 0.16 mm layers, 4 walls, 30% cubic or gyroid infill
- X-Y hole compensation +0.05 mm
- Supports: tray only, tree, "on build plate only" (two small rail tips).
Material: PETG or ASA recommended. PLA works but softens around 55–60 °C; keep an eye on SSD temperature if it's used as a busy cache.