Dragonfly Lamp - Celebrating NASA's Mission to Titan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Celebrate NASA's Dragonfly mission to Titan with this lamp featuring three lander scenes and mission logo on the lid!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In a rush?
Hate reading instructions and want to get down to it? You need to the base, shade, and lid. The two rings are optional for free rotation of the shade while keeping the power cord to the back. Each piece is properly oriented for printing when loaded into the slicer and ready to print provided that you align seams to the rear. PLA works great--on my 0.4 mm nozzle, I used 0.1 mm layers for the shade and 0.2 mm layers for everything else. 100% infill on the lid, 10% to 15% on the rest. No brim, no support. Enjoy!
Getting Started
This lamp is a tribute to NASA’s Dragonfly mission, the dual‑quadcopter lander headed for Saturn’s moon Titan in 2028 and arriving in 2034. Get a head start on the cool kids and print your Dragonfly lamp today!
The shade showcases three artist‑concept scenes of the Dragonfly lander on Titan, rendered as lithophanes that glow beautifully when lit. The base and lid both feature an embossed Dragonfly mission logo, tying the whole piece together as a cohesive celebration of the mission.
The design follows the same overall geometry as my Mars Rover lithophane lamp, but in a shorter, more compact form with a round shade and the same Bambu P1 LED light module (or equivalent) for clean, even illumination.
The Parts
The Dragonfly lamp comprises these parts. Bold indicates those with print files in this model.
A base that houses the light module and supports the shade.
A translucent shade, threaded for easy assembly and long-term stability.
A translucent lid with threads for attaching to the shade.
A Bambu P1 LED module or equivalent available from many sources.
Optional coupler ring and base trim to enable free rotation mode (more on this below).
Print Settings
Dragonfly lamp STL files are ready for your slicer. Print recommendations:
Layer height: 0.1 mm for the shade and lid, 0.2 mm for everything else
Walls: 3–4 for crisp lithophane detail
Infill: 100% for the lid, 10% to 15% for everything else
Seams: Align to the rear
Supports: No
Brim: No
Filament: PLA
Colors: White or natural PLA for the shade and lid
For extra credit, consider using one of the Dragonfly mission colors for your base. The primary color of the mission is a rich yellow relating to the golden hue of Titan, and the secondary color is a rich red.
Color | Hex | R | G | B | Pantone | |
|---|---|---|---|---|---|---|
Primary | #FDB71A | 253 | 183 | 26 | 1235C | |
Secondary | #AD293D | 173 | 41 | 61 | 201C 95% tint |
Assembly
Lamp parts are designed with matching thread positions so the base, scenes, and lid line up at the front. These might be off a few degrees depending on your print settings. I found that gently rotating matching threaded parts back and forth near the "fully tightened" stop cleared a bit of the thread ends to get the last bit of alignment the way I wanted. Straight off the printer, connected pieces will tend to lock up when they are tightened. To disassemble, the trick is light pressure and patience.
Standard Configuration
The default set up uses the base, shade, and lid (and light!), and it places the Dragonfly lander in flight as the focus scene at the front of the lamp. To start, thread the light's USB end all the way through the opening in the base from the top. The light puck will drop into place, and you can then secure the cord in the base. Next thread the shade and lid into place and you are done. Plug in the light and enjoy!
Free Rotation Mode
Use free rotation mode to show other scenes in the front while the power cord remains in the back. In this mode, the shade sits snuggly on the base, held in place by gravity and a locating flange. You will need the two optional parts: the base trim and coupler ring.
The base trim is 5 mm high with a smooth outside and screws onto the base to hide the threads. It will stick up a mm or two above the top of the base. This is expected, and the extra bit gives you something to hold onto when removing it.
The coupler ring has locating flange to keep the shade in place. Screw this ring into the bottom of the shade with the flange pointing down. The coupler ring is shorter than the thread space in the shade. You need only screw it in far enough for all its threads to be inside the base.
Thread the light's USB end all the way through the opening in the base from the top. The light puck will drop into place, and you can secure the cord in the base. Next, thread the lid onto the shade and then place the shade onto the base, rotating the scenes as desired.
Source Material
The three Dragonfly scenes are artist renderings available from the Dragonfly mission website gallery page at Johns Hopkins Applied Physics Laboratory.
Surface Operations - Artist’s impression of the Dragonfly rotorcraft-lander on the surface of Titan, Saturn’s largest moon and a major target in NASA’s quest to assess habitability and search for potential signs of life beyond Earth on worlds across the solar system. (uncredited)
Dragonfly in Flight - Artist’s impression of Dragonfly soaring over the dunes of Saturn’s moon Titan. NASA has authorized the mission team to proceed on development toward a July 2028 launch date.
(credit: NASA/Johns Hopkins APL/Steve Gribben)
Dragonfly on the Surface - Dragonfly prepares to sample and examine the surface of a landing site on Titan. (credit: NASA/Johns Hopkins APL/Steve Gribben)
Model files are created by me, with some based on public domain elements found in many other lithophane-style lamps on the Interwebs.
Feedback
I hope you enjoy this lamp and that you are inspired to learn more about Dragonfly, Titan, and our amazing cosmos. I would love to see your makes and hear your feedback.
Licensing
The Dragonfly Lamp model is my own work (see Source Material above) and is licensed as “Creative Commons — Attribution — Noncommercial — Share Alike”. Please do not repost the model or sell makes. On the other hand, give them freely and share the excitement of discovery!
Giving Back
If you liked this model and are so inclined, please consider a small donation to a non-profit that is making a difference in your community or around our own globe.
Use of the Dragonfly logo and images does not imply endorsement by NASA or the Dragonfly project. |
|---|