Panasonic Genius Prestige Microwave Door Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple part to repair your Panasonic "the genius Prestige" microwave
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement door latch arm for your Panasonic microwave. Mine is a "the genius Prestige" model #NN-SN797S built in March 2013. The two guide pins on my latch arm broke as shown in the photo.
Print Instructions:
PETG is recommended. PLA would likely require a brim and would make post processing difficult
Print with small layer heights. Variable layer height is your friend here.
3 perimeters is adequate
Pry away the plastic frame in between the latch arm and the window to access your latch arm. The frame is just snapped in place. This part is very easily to replace. Takes a minute if you're lucky with the spring.