Liczymy pasujące modele…
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it…
I am often taking my external hard drive with me, and I didnt have a proper, safe place to put it while it is hooked to my PC. This mount is designed bigger to accommodate 3mm thick felt padding that is glued to the bottom, and to the…
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's…
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 150mm disks at a time.
Wall mount for CatchCover Quick Disk system. Use for Rattle Reels, Fishing Rods, Cup holder, etc. Category: Gadgets
This hot-swap drive tray fits the Supermicro SC743 chassis
SanDisk SSD Protective Case with cable and USB adapter storage. Designed for SanDisk Model: SDSSDE61 Tested and Fits: 1 TB & 2 TB SSD The SSD slides into the protective cover and is held in firmly by a friction fit. The slide-on cover…
Disk for MB “Four in a row.” Print the two halves in one time, after printing glue them together with super glue. Almost identical to original. Print the glue ring to glue the two parts together perfectly with small drops of super glue.
This 3D model represents a vintage 3.5” floppy disk with a worn, slightly aged look and a mysterious label reading: “EVIDENCE 17 BK FILE 1” . Designed with realistic proportions and subtle surface details, it’s perfect for use in retro…
Inspired by a random and satisfying disk case I found from the late 90s, this single-print floppy disk case is a great way to pocket a handful of 3.5" disks for on-the go retro photography with your Sony Mavica camera. Uses a robust…
Remix of an excellent print. This gives printers an MMU compatible, dual colour option of the kumihimo 8 slot disk for bracelet making
This model is designed to store Miele PowerDisks in a kitchen cabinet. The main purpose is to store it in such a way that kids are not able to play with them, and to organise the kitchen a bit more. When you print this design twice and…
Convert DeWalt orbital sander to disk sander. DeWalt Models D26450, D26451, and D26453. Secure to work table with screws through base. Used a nylon strap from a reusable bag or pipe hanger strap to secure the sander with screw holes…
Updated - I had a few screw clearances that were off. I have printed and tested. It works for me, but it's a really tight fit with all the wires.
I utilize @BeaRes' Floppydisk Filament Sample: as my method for cataloging my filament sample inventory. I wanted an easy way to store all my different samples in a gridfinity-compatible tray. This tray is based on a 1x4 gridfinity tray.…
Simply slide your grid storage system into place for easy access in your workshop.
Materials Screws 8x Original screws from feet 8-14x M3 x 6mm 2-4x per Support Bar to Side Rail I use 2 per bar, but there are holes for 4 1x per Rear Side Plate to Side Rail 14-22x M3 x 8mm 4-12x Side Rail to Disk Drive 3x per Front Side…
It's a disk that goes over the tip of the "screw" so that it does not fall back out when the panel is opened.
you could print the top and bottom in black and the rest in white to make it look like a certain cookie.
This model is compatible with the lego system.
I needed a spacer disk for a beautiful pendant lamp shade file I was printing to adapt to my pendant light kit. It's 100% resizable and easy to print.
Same hooks as used in the referenced, just made additional sizes based on original model dimensions
I love these filament samples! ( https://www.printables.com/model/862027-floppydisk-filament-sample ) Such a fun and practical design - but I am old enough to not only remember the 3 1/2 storage cases... I even had a couple still in my…
This is my first 3D model, and I am not a CAD professional nor an engineer, just a 3D printing enthusiast. This model was drawn and designed in SketchUp. The main idea behind this model is to make a protector for the cutting disk on the…
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
Aluminum wheel model. I originally created a replica for a friend to put on his car. And now I'm releasing it to the community. It's my first model of this kind. Model hliníkového kola. Původně jsem vytvářel kamarádovi repliku, kterou má…
Remember floppy disks? I tried to create what they would be like in 2026 using some off the shelf components and a custom PCB. These are all the 3D printed models, no supports required.
This is a LaCie HDD stand which I've designed for myself. The Stand is compatible with the LaCie Mobile Drive's 2.5'' and the LaCie rugged 2.5''. All slots are of the same size. I printed it with 0.2 mm Resolution with PLA. The only Issue…
This mount is designed to be fixed to any vertical surface and hold a 2.5" SATA HDD. It provides two mounting holes for screws. I also designed it with ventilation in mind to keep the hard drive cool and prevent it from overheating. There…
I had to grind the inside down just a bit to fit. I cut metal lead off and snapped into place. Great fit. Originally printed on the AD5X. No supports.
Storage Box for 10, 13 or 20 3.5" Disks with Hinged Lid 3 versions, the normal 10, 13 (for Rise of the Robots Amiga 1200) & 20 disks. 10 capacity version shown. To connect the lid just feed in 1.5mm filament throught the hole and cut at…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
A few Flex Door Stop Discs in various sizes. Printed with TPU. Very easy to use with your feet and they always stay in place. They're also fun to use on smooth floors... like a puck. The 90mm version is also suitable for carpets. The less…
Just print as is, without supports. I've used 0.32mm layer.
Damping foot for Synology DiskStation to isolate the HDD sounds from the rest of my house
Disky pro model auta 1:24 vzor ARC Brno, lomené. Model vytvořen primárně pro Škodu Rapid od deAgostini, ale lze použít na jakékoliv vozidlo daného měřítka. Model vytvořen pro použití s originálními pneumatikami.
This model helps keep your 45 vinyl record form going cattywampus. You put the disk or puck on the stick of the record player. I didn't use any supports or ironing.
Strong 3D printed version of the Kumihimo Disk found on Amazon. This is obviously hard plastic, so it's a bit more pressure when slotting in the paracord, but the good thing about that is how much more tight you can make the knot. It…
3D Printed Kumihimo disk for braiding 3/8" rope.Two versions, I started with the larger version thinking it needed to be proportional to the smaller version used for paracord. It does work, and is what I used for the knot picture. But it…
This 3D printable Kumihimo disk is designed to help you create beautiful Kumihimo bracelets with ease and precision. Featuring 8 evenly spaced numbered slots, this disk allows you to securely hold and organize your threads or cords while…
I didn't like the card board chits for the Data Era expansion for Underwater Cities, so I made these.
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see…
The sandisk quickflow microsd reader is very fast but it is a lot bulkier than I'd like and has no way to attach to a keychain. So I made my own case. The sleeve is supposed to be printed in vase mode (with 0.8mm of bottom layers), adjust…
The wall thickness of the model is 0.8, but it's meant to be printed in vase mode, with bottom 10 layers as solid
Stredová krytka ALU disku bez loga,priemer vnútorný 58mm / 64mm vonkajší.Plocha pre nalepenie emblému 64mm./ALU wheel center cap without logo, inner diameter 58mm / outer 64mm. Area for sticking the emblem 64mm.
This is a tool designed to aid in cleaning the surface of 3.5 inch floppy disks. It is a modified version of Lemaru's 3.5 inch floppy disk cleaning tool , released under Creative Commons. Developed for use at the Czechoslovak Game Archive…
These disk holders were designed around the disks in thystonius' Creature Power Vests and the remix I did on that design. The short container will hold 10 disks and the other type holds 20 disks. I've test printed all of these and will…
Chain by @illegible_470587 and Dummy Spool by @Prusa3D the other parts were made by me made for a competition
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
I would not print the clip on the back, or make it have a lot of infill, mine broke off and I glued it back on.
2.5" (inch) Hard Disk Storage Box - 6 Disk Capacity Can store both mechanical and ssd. The maximum drive thickness is 9.5mm. To connect the lid just feed in 1.5mm filament throught the hole and cut at each end. Lots of room on the top for…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
If you for whatever reason want to open and close the PowerDisk dishwasher detergent boxes of your Miele dishwasher this cover might be useful for you since the foil typically gets destroyed by opening it. This prints best with 0.2mm…
Prints with no supports, 0.20mm layer height ok, infill 10% ok (gyroid recommended). With this settings, tested on Creality Ender V3 KE, the Kingston DataTraveler should fit easily and not fall out when cat is turned over. Happy printing…
Tool to support creating woven bracelets - the art called kumihimo. It is an easy print - use the pre-colored .3mf file with your Prusa slicer and print this disk for your bead weaving needs. There are 32 slots around the outside of the…
An ugly-but-functional holder for 2.5" disks for use in One Nine Manufacturing Ltd's Standard Pi-4 Touch-Screen Case instead of the standard snap-on back cover. Instructions: print two copies, mirroring one. Print with the side facing…
The slot is designed on the underside for easier and faster removal of the card.
Adaptor works with these. https://www.amazon.com/dp/B0C14JNBMY?ref=ppx_yo2ov_dt_b_product_details&th=1
A sleeve storage for ssd , usb connection is accessible , printed standing up, with fuzzy setting .
SRAM Guide disk brake pads spacer, meant to be used when transporting your MTB without the front wheel on. Remixed from a bleeder I found on https://www.myminifactory.com/object/3d-print-sram-guide-rs-piston-spacer-block-66782 . Print…
Landing pad for your helicopter toy! Original design for the 2024 Christmas Community Print Drive . My daughter designed this “Helipad Disk” for the 2024 Print Drive. She figured out the design and did the modeling, slicing, and printing!…
Holder fits on Bambu p1p w/o supports. The dividers have thin, break-away connectors and can be printed vertically w/o support (recommend a brim). Printed w/PLA, .4mm nozzle, 0.24mm layer
A simple, easy to print sanding disc holder for pegboard. Left open on both sides to show the grit on the sanding disc, save filament and time and to keep dust from collecting inside.
as simple as it seems, you've got a favourite game? well display the disk. smash brawl has a great disk and now fits perfectly on my desk. enjoy!
Portadischetti trucco. Rispetto alla foto ho migliorato il disegno rendendo le superfici più tonde nella versione del file pubblicato. E' un porta dischetti per rimuovere il trucco dal viso, si possono collocare i dischetti di tipo grande…
The 5" sanding disk holders print quickly and easily, the locking tabs are top mounted to allow simple printing and a flat, stable bottom. I printed these in ABS but any standard hard filament will work (PLA, PETG, ABS, ASA, Nylon). No…
If you have removed your passenger frame, you can use the bolts on the bikes clutch side to mount this disk lock carrier. I used some velcro to really secure it, but I suspect it would be fine without it as it's a pretty snug fit. Printed…
Bring order to your workshop with this innovative Gridfinity-compatible 5-Inch Sanding Disk Organizer! Designed to neatly store and sort your sanding disks, this print-in-place model requires no supports, Has versions for 5 & 6 inch…
Yes there are a bunch of floppy disk coasters out there, but they all had quirks that I didn't like, so I designed my own. So here we are adding another coaster (with a quirk that someone else won't like). I've included the autodesk…
This will click into a Lenovo Neo 50q tiny. It may work for other models, if so let me know and I will add them to the description. Your hard disk should click into and fit snuggly in the cradle of the caddy. Slip the edge slots over the…
A storage solution for 115mm angle grinder disks. Add as many compartments of different lengths as you need to store, organize and protect your disks. Printing I've grouped several of the components together to make it easier to download…
Use 8 (or 12) power supply screws (#6-32 Phillips Hex) to connect the adapter to the 5.25" blank.
I was missing one hdd tray in my case, I sampled one inside and designed my own. It was holding sideways without screws (you can screw 4 screw on bottom) I changed them because it would be struggle to print. Instead there are screw holes.
Updates: [8.10.24] revisit 1: first testing feedback gathered. grabber sides are now parallel instead of an opening angle. distance between claws has been reduced to increas “grip” on lost disks. no changes to print settings etc. all…
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
Holds alignment stick at different angles. Held in place w/ standard golf tee into ground. Can be swiveled around. 0, 45, 47.5, 50, 52.5, 55, 57.5, 60, 62.5, 65 degrees Stick hole diameter is 8.5mm Tee hole diameter is 6.5mm Lightweight -…
I present to you a new cutting disc model for your old ))) robotic lawnmower Worx Landroid WR155e (and same). For assembly, you will need M5 heat-set inserts with a height of 8-10 mm and blades from a BOSCH INDEGO lawnmower. The model…
I never use the disk sander and it is right next to the power switch, so I removed it and made this cover for safety. FreeCAD source files available on request.
I bought a cheap 1U rack (Techly 306172 Ultra compact 1U) who don't have any 3.5 bay or cage. So i designed a simple cage and glued to the case with some 3M VHB tape.
So, since I have some games that are missing their cases, I took my caliper, measured an original case, and created a reproduction. It is a reproduction because, although I tried very hard to make the 3D printed part fit with the original…
Parametric spool alignment disk for the Filament Spool Switcher & Winder for Bambu Lab AMS
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Mounting bracket for the TRS80 Model 3 and Model 4 for the floppy disk and serial boards. This fits in the square metal hole and holds the card at the correct spacing. I use PLA and make sure you pre-screw in the bolt as it might take a…
I needed a HDD cooling stand for my home lab if I just want to quickly attach some disks without screwing them in trays for my rack server. Temperature is the death of disks, so they need cooling and I had a 90mm fan lying around. Fits 4x…
I designed this back when I first watched the movie and had planned on selling it on Etsy. It's mostly designed to be resin printed, of course I've since developed a bad reaction to the resin and can no longer work with it; So, I've…
SanDisk SSD holder with increased hole sizes to accommodate brass inserts.
In Germany, it's pretty common to take a handcart loaded with beer for a day out, especially during traditional events. But navigating downhill with cheaper handcarts can get tricky—and potentially unsafe. To address this, I installed an…
Ever wish there was a place to mount your Light on your Shiv Disk bike? Well, this is it. This light mount slips into the read hydration tank on your S-works or Specialized Shiv disk and is securely held in place by the rubber top. No…
