Storage Box for Floppydisk Filament Sample
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini replica of a floppy disk storage box, contains the floppydisk-shaped filament samples I previously designed.
- Ocena
- 4,667 / 5
- Polubienia
- 114
- Pobrania
- 408
- Wydruki
- 11
- Wyświetlenia
- 1728
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the container for my filament samples shaped as mini-floppydisks that you can find here: https://www.printables.com/it/model/862027-floppydisk-filament-sample
I 3D printed the Storage Box with 0.12 layer height but 0.20 still works fine. No supports needed. I 3D printed the lid in vertical position as my 3D printer can handle that bridge on the nose, but you can also 3D print it in horizontal position with the hinges facing up.
The Storage Box mimics the old floppydisk containers of the 90s so for better results I suggest to use gray, beige or white for the base and trasparent for the lid. PLA or PETG are both good.
There's a preferable way to assemble the lid, as there is a flaring part in the lid hinge.
