Liczymy pasujące modele…
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I split the design up into 3 parts for easy printing the magnet I used is a 6mm dia x 1mm thick Neodymium Magnet 0.35kg Pull. I have also included blank disk labels template so you can create your own custom labels. Please share your…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Meet my next floppy installment! The floppy stocking! Printing Instructions: IMPORTANT Stocking Bottom.stl and Stocking Top.stl are meant for printers with MMU or AMS connected to them. You must import them just like I have instructed…
A floppy disk that can hold up to 1 TB. https://www.youtube.com/watch?v=nez5D-GYKAo&ab_channel=Dehapro
Build a retro inspired 3.5in floppy disk with PyPortal, CircuitPython and 3D Printing! This small USB drive displays icons and filenames on a color TFT display. Enclosure designed by Noe Ruiz This project was inspired by Dana Sibera, aka…
The long anticipated floppy beard is here!! This fantastic beard is designed to be worn on your face! Also included is a clasping mechanism to make it easier to put on and take off the beard. Clasp_A has built-in supports that will need…
This is a small Floppy Disk Swatch with a Print-in-place design with the top being moveable The size of this model is (50x52x2mm) and uses 5.5g of Filament taking about 24mins to print with a layer height of 0.2mm. I used some 32x32mm…
A drink coaster styled after a vintage 3.5-inch floppy disk, with a main base, separate label insert and removable shutter detail. Glue the label to the base and optionally secure the shutter or leave it removable. Prints in three parts…
Craving the nostalgia of the old computer games I used to play, I created a properly proportioned model of a 3.5" floppy disk and combined its artistic charm with the functionality of a magnet! The model accepts 6x2mm round magnets, which…
Store and protect up to 12 3.5 floppy disks with this 3 piece case. The front opens up to allow for better access to the diskettes. No screws needed, the different pieces fit perfectly. For the front plate you can choose the one without…
Si tratta di un supporto per una perforatrice quadrata (quadrato da 6mm) acquistabile su aliexpress/amazon che vi permetterà di forare floppy disk 5 1/4 sul lato opposto per utilizzare anche la seconda faccia dello stesso (deve essere…
No, I did not 3d print the "save" icon! A handy place to keep floppy disks, for those that still use them.
Tired of your old napkin holder not having enough capacity? Then upgrade to the floppy disk napkin holder with an astounding 1.44MB of space! The amount of napkins this thing can hold is off the charts! At least I assume as I haven't…
5,25" Floppy Drive Lever for Chinon FR-506.
A designer floppy disk holder for your 5.25" Commodore 64 or VIC-20 floppy disks. It can comfortably hold around 20 disks. Be sure to post your makes! If you like the design, please consider tipping on Ko-fi . Thank you! :-)
scaled down to 60% accept in Z X40mm Y40mm Z1.4mm printed in sample unknow black PLA acts like PETG Anet Red PLA and sample unknow white also acts like PETG
u bought a floppy drive and the eject button is on the opposite side than the case cutout? download this and fix that problem!
Hello, Sharing my project of stand/holder for floppy discs (5,25”) for Commodore64. Fits 30 discs. Letters are printed separately. If you're printing from STL file, for letters set the X-Y hole compensation to 0.12 and X-Y contour…
Holds 12 3.5 inch floppy disks, small footprint, prints without supports. The floppies are easily viewable and easy to insert and remove. Prints in about an hour and a half, and uses less than 40 grams of filament.
What is it? The Floppy Voltmeter Clock is a special clock that instead of using the usual rotating hands, or seven-segment displays in the case of digital clocks, uses two analogue voltmeters in a retro style. It is therefore a unique and…
This 3D model represents a vintage 3.5” floppy disk with a worn, slightly aged look and a mysterious label reading: “EVIDENCE 17 BK FILE 1” . Designed with realistic proportions and subtle surface details, it’s perfect for use in retro…
Inspired by a random and satisfying disk case I found from the late 90s, this single-print floppy disk case is a great way to pocket a handful of 3.5" disks for on-the go retro photography with your Sony Mavica camera. Uses a robust…
I utilize @BeaRes' Floppydisk Filament Sample: as my method for cataloging my filament sample inventory. I wanted an easy way to store all my different samples in a gridfinity-compatible tray. This tray is based on a 1x4 gridfinity tray.…
The CYUL Apple ][ Floppy EMU case was near perfect — I just wanted to add a colorful Apple badge to the mix. I used Retro Platinium, Candy Apple Red , and Light Blue for the buttons. I don't have light pipes that work yet. (I'll get a…
I love these filament samples! ( https://www.printables.com/model/862027-floppydisk-filament-sample ) Such a fun and practical design - but I am old enough to not only remember the 3 1/2 storage cases... I even had a couple still in my…
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes
Remember floppy disks? I tried to create what they would be like in 2026 using some off the shelf components and a custom PCB. These are all the 3D printed models, no supports required.
I have older model A and B Floppy Emu that uses sockets for the LCD, making them taller than the later models. This uses 4, M3 x 12mm flat head screws threaded directly into the plastic to assemble the case. I printed my case in PETG, no…
Storage Box for 10, 13 or 20 3.5" Disks with Hinged Lid 3 versions, the normal 10, 13 (for Rise of the Robots Amiga 1200) & 20 disks. 10 capacity version shown. To connect the lid just feed in 1.5mm filament throught the hole and cut at…
Replacement bracket for mounting an internal floppy drive in an Amiga 1200. M3 screws will fit.
Replacement bracket for mounting an internal floppy drive in an Amiga 600. M3 screws will fit.
💬 “It really flops this time!” Following your appreciation for my “Floppy New Filament Sample” , I couldn’t resist bringing the legend back - bigger, flatter, and floppier than ever! It is a fun and simple color sample inspired by the…
This is the floppy drive slot cover for the Macintosh II, IIx, and IIfx. A light pipe is also provided that will take standard 5mm leds.
This is a tool designed to aid in cleaning the surface of 3.5 inch floppy disks. It is a modified version of Lemaru's 3.5 inch floppy disk cleaning tool , released under Creative Commons. Developed for use at the Czechoslovak Game Archive…
Chain by @illegible_470587 and Dummy Spool by @Prusa3D the other parts were made by me made for a competition
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License Flowalistik…
If you're a specific kind of nerd , you probably know and love the Dell MPF82E. It just looks like some boring internal part for old Dell Latitude D-series laptops, so normal people don't buy them, but they're actually really great USB…
This is a Case was made for Gotek Floppydrive with 0,96'' Display and Rotery Encoder
Yes there are a bunch of floppy disk coasters out there, but they all had quirks that I didn't like, so I designed my own. So here we are adding another coaster (with a quirk that someone else won't like). I've included the autodesk…
I had a couple 9 pin USB port cables left over from a PC build I did back in 2012. I wanted to connect one to the headers on the motherboard of an old retro computer I recently acquired, and I wanted to expose it through the case's extra…
This cute little animal is a print in place model and is SUPER ADORABLE!!! 3mf file provided for multi-material printing. Happy printing! Print Instructions: Layer Height: 0.16mm Walls: 3 For those who have joined my club at the…
This 120x120mm Waffle fidget toy is foldable, floppy, and full of fun! Enjoy!
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Additional pieces for connectors that allow you to create Pen holder / desk tidy / storage cube from floppy discs found on thingiverse ( https://www.thingiverse.com/thing:2919120 ) Printed on Flashforge Adventurer 5m pro No supports 60%…
Casing for a 3 inch disk drive. You will need 4 M3*10 screws to fix the casing to the disk drive; Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 0.2 Filament: Prusament PLA Notes: I get the best result…
See the description on the djos_1475's part I remixed. Note that you can use just my front (or back) with the rest of the parts; they should all intermix just fine.
Don't copy that floppy! Unless it's a CC model. A collection of 3.5" double-density floppy disk models based on the work of Spectura and FightTheFoo . These come pre-formatted for MS-DOS. I've added several variations of the model to…
Floppy Disk SD card holder. Remixed from myminifactory but couldn't find it on Thingiverse. Original is here: https://www.myminifactory.com/object/3d-print-floppy-disk-sd-card-reader-pendant-29923 Print in the orientation its in for best…
I needed dual color led and the stock RED diffuser was replaced with one printed from transparent PET-G.
For this build, you need a very specific spring. I got mine from a spring assortment from the big online store with A. It needs to be a compression spring with a length of 34.9 mm and a diameter of 9.12 mm. If you search for “9.12 x 34.9”…
A small box that can hold up to 10 3.5" floppy discs in a stair step orientation.
This is a top and bottom for a bare 5.25" floppy drive such as the TEAC FD-55GFR. It is almost certainly compatible with other TEAC FD-55 drives, and likely with other floppy drives of the same vintage. (Note of course that the 5.25" is…
This is a christmas tree ornament that doesn't require supports (above ~35mm on Bambu X1Carbon) so you can print entire plates of them. The hat was rounded both to make him look less elf-like, banana-like, and overall
Missed Floppy Disks? Here are cases for 2.5" SSDs and HDDs that bring them a vintage look. The cases are open bottom to be inserted into vertical desktop racks. print at 0.2 layer height UPDATE: use v2 stuff where available, small…
Required Screws: 4x M3x4 Screws for the PCB 4x M3x4 Screws for Drive 8x 4x30mm Wood Screws for the Case All screws go directly into the Plastic.
This is just the head files for my floppy ear bunny dog doll BJD Doll bc I promised full doll here: https://cults3d.com/:2536741 use 5x3mm magnets or sticky tak more detail in the full assembly vid here:
These are replica 3.5 floppy disks for use as coasters. The 3mf is split into objects to allow for multi-color printing. The backing should be printed in TPU to provide a better non-slip, non-marring surface.
I remixed the design of an existing Floppy Disk SD Card Holder : https://www.prusaprinters.org/prints/10685-floppy-disk It had a few problems including the following : It was not usable as a portable container for SD cards. No place for a…
Case for my Floppy Emulators from Big Mess of Wires, done as a pastiche of Macintosh Platinum to match my SE/30. Everything pops into place, then hold together with 3mm screws (thread the Case_Top posts to catch them, i used 8mm long…
Amiga 4000D HD/Floppy/Gotek Bracket with passthrough for SD card extender. Currently building A4000D with z3660 accelerator and wanted to have sd card easily accessible from the front panel. Unfortunately original bracket is closed from…
It's a floppy heart! It's fun to fidget with! It comes in 3 sizes! You're welcome. The most satisfying one is the largest one, FYI, but the medium sized one is also quite satisfying to play with. Recommended Printing Instructions: The 3mf…
As Amiga 4000D doesn't have that much space in front for additional gadgets, I redesigned this Gotek bracket and added slot for SD Card extender and additional USB host port. To fit USB connector, I removed Gotek LEDs and buttons as…
If you have a Retina MacBook 2015 (A1534) you will know that the hinges fail because of a deliberate bad design. This causes the screen to flop open and not stay up. There is no repair for this except a new screen. These two little…
In honor of PexPeppers being my hot sauce of choice, I present my floppy jalapeno! Two types of prints are available. There are files that allow you to print the jalapeno and stem separately and assemble them and there are files where it…
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
Recreation of a 3.5 inch floppy disk which I use as a coaster. Change filament at 2.6mm if you'd like the metallic spring cover to be a different color.
This is a frame designed to securely hold a standard 3.5" floppy disk and allow said disk to be hung from a lanyard. It uses notches present on most (if not all) floppy disks as a way to positively click the disk in place and not allow it…
I got a SPARCstation IPX that was missing its floppy drive. I didn't really need it, so I decided to design this bracket to let me install an SD card extender in its place, for use with the BlueSCSI I also installed. (If you need a…
A floppy disk coaster (if you could like and download the file it would be great, I want free filament) thankyou!!
Remix of InbetweenDays' model. Also available on MakerWorld with a profile for Bambu 0.2mm nozzles.
What is it? The Floppy Voltmeter Clock is a special clock that instead of using the usual rotating hands, or seven-segment displays in the case of digital clocks, uses two analogue voltmeters in a retro style. It is therefore a unique and…
a longer case designed for fitting an addapter board internally
Recently I realised, that my girlfriend had some Floppy Disk left over. Hence there is no real usecase for those historic storage media anymore, I decided to be a little bit creative and thought about, how to recycle those Floppy Disks,…
Is it flexi-rex? NO! IT'S FLOPPY REX!! This is a remix from this model . Printing Instructions: The 3mf file provided was saved in Bambu Studio and has the following configurations set: Layer Height: 0.16mm Wall Loops: 3 For those who…
3.5-inch Floppy Button Print with the floppy label up, add colors to suit your taste
Print your floppy four leaf clover today! It's almost clovering time! (Is that a word?) Printing Instructions: The 3mf file was saved using Bambu Studio and should already have the following settings configured: Layer Height: 0.16mm Wall…
Update March 13, 2025: There were a couple pieces of the pie that were fused together. The updated models should have this remedied. It's a floppy pie just in time for Pie Day (March 14th) Yay!!! Pie Crust.stl and Pie Filling.stl are…
Slimline 3.5" floppy disk drive and Greaseweazle ver 4.1 enclosure. This is a remix of a housing for a Greaseweazle ver 4 https://cults3d.com/en/3d-model/gadget/greaseweazle-v4-case The bottom will require supports in the screw holes but…
Celebrate Easter by gifting one of these cute floppy eared bunnies with trumpet lily flower hats! I saw an image online of a bunny with a flower on its head and wanted to re-create it! Smooth and simple printing and easy assembly! Print…
This is a ~40% model of a 5¼" floppy disk, common in the 1980s. Generally speaking, proportionally correct, except for the thickness, so as to allow more FDM printers to successfully print it. Print flat, and use supports ONLY for the…
IT'S SO FLOPPY!! Impress all your friends and family this Easter as you show off your floppy eggs for all to see. Let everyone feel the satisfaction as they handle your floppy eggs and experience the floppiness! Printing Instructions: The…
This is a remix of hakmo 's 3.5" Drive Bay Cover for Antec with USB 3 and Type C Ports I made it a little wider to fit the drive bay on my PC and changed the clips to work with my case. I also needed a spliter and a USB 3.1 to USB 3…
This is a remix of a standard 5.25" PC front bay cover, modified to include a 3.5" slot — perfect for installing a card reader, floppy disk drive, or other legacy accessories. Designed to fit standard ATX cases with front 5.25" bays. The…
It's a floppy disk! get it? ... If you don't then you're too young... For you youngin's out there, the "save icon" you're so familiar with is an icon of a floppy disk which represents a kind of storage device for computers. Flex on all…
Small storage for 3 floppy drives. still un use in some industries, very handy to keep your desk good looking. I glued some magnetic tape at the back to place it on my PC tower.
This is an adapter for the Gotek USB floppy emulator that can be used in the Amstrad CPC 664. It can be used with an alternative firmware to read directly DSK images: https://github.com/keirf/FlashFloppy You will find the STL file…
Post-Printing For the top shell led hole, hot glue can be applied as a light guide. Apply it to the hole from the inside of the shell, but not too much or the PLA might melt! After the glue has cured, cut it flush to the surface with a…
A USB-drive case that looks like a floppy disk. The size of the USB-drive I used when creating the model is 18mm x 46mm x 10mm. I'm printing it using PLA. Original creator of the Floppy disk model used is the amazing PSD PRO…
Various brackets to stack 2 (or more) 1541 floppy drives on top of each other. The weight of the bottom device keeps everything stable. The space in between provides enough room for ventilation. I designed 4 models: Single: a separate…
![Apple ][ + Floppy Emu with Apple Badge Cutout](https://media.printables.com/media/prints/f1c5d791-ab80-47a5-a3c9-1058ac380797/images/12110393_aa0136aa-4188-4bfc-b4f4-5b3c0d25124c_8adda14c-7ec0-44e8-aced-1619e97fdecd/img_7430.jpeg)
