1 / 2
5.25" Half Height Bay Gotek Floppy Emulator Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5.25" Half Height Bay Gotek Floppy Emulator Bracket that fits an OLED
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
5.25" Half Height Bay Gotek Floppy Emulator Bracket that fits an OLED (either 28mm or 26mm wide PCB). Includes bezel and non-bezel versions.
Space for a rotary encoder & 0.96" 128x64 OLED display which just slides into place and holds well.
v2 is 2mm deeper/longer as I found two versions of the 5.25" half height specifications on the web so need to test further.
- After printing v2 it is too short for modern PC cases, so a new version for these cases has been added. This version the holes are 52.75mm from the front, basically added 5mm for the bezel. I recommend this version unless you know your case is shorter
- Added a new version with two sets of holes on the side to help with case mounting
- Added another new version with a front panel Bezel (sides only)
- v2 Bezel added, no extra width and slightly thicker for better printing
*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+