1 / 2
5.25" Half Height Bay Gotek Floppy Emulator Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5.25" Half Height Bay Gotek Floppy Emulator Bracket that fits an OLED
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 111
- Makes
- 0
- Views
- 862
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
5.25" Half Height Bay Gotek Floppy Emulator Bracket that fits an OLED (either 28mm or 26mm wide PCB). Includes bezel and non-bezel versions.
Space for a rotary encoder & 0.96" 128x64 OLED display which just slides into place and holds well.
v2 is 2mm deeper/longer as I found two versions of the 5.25" half height specifications on the web so need to test further.
- After printing v2 it is too short for modern PC cases, so a new version for these cases has been added. This version the holes are 52.75mm from the front, basically added 5mm for the bezel. I recommend this version unless you know your case is shorter
- Added a new version with two sets of holes on the side to help with case mounting
- Added another new version with a front panel Bezel (sides only)
- v2 Bezel added, no extra width and slightly thicker for better printing
*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+