5x 3.5 inch drive holder (Hard / Floppy Drive)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount 5 3.5 inch Hard disk drives (HDD) or Floppy Drives (FDD) on top of each other.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 416
- Wydruki
- 4
- Wyświetlenia
- 2707
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Mount for 5 3.5 inch drives
I wanted to mount 5 Floppy drives on top of each other to experiment with playing MIDI files trough their stepper motors (See: Floppytron). While searching for the mounting hole specs I found that these were the same as hard disk drives. I wanted to remix this Triple Hard Drive Holder, but due to being unable to read Solidworks files on my Mac I recreated my holder from scratch, based on this design.
After printing, I noticed that the gaps between the drives were larger than necessary for my needs, thus made updated to the model resulting in a 5 FDD Holder. Additionally I made the holes larger in case you have screws with a thicker, unthreaded part like I do. I didn't bother reprinting, thus untested for now.
5 HDD Holder specs
Mounting hole diameter: 3.7mm
Distance from resting plate: 6.4mm
Distance between holes: 120mm
5 FDD Holder specs
Mounting hole diameter: 4.5mm
Distance from resting plate: 4.4mm
Distance between holes: 115mm