1,210 models
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Tool to support creating woven bracelets - the art called kumihimo. It is an easy print - use the pre-colored .3mf file with your Prusa slicer and print this disk for your bead weaving needs. There are 32 slots around the outside of the…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
I split the design up into 3 parts for easy printing the magnet I used is a 6mm dia x 1mm thick Neodymium Magnet 0.35kg Pull. I have also included blank disk labels template so you can create your own custom labels. Please share your…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Qoricancha Sun Disk
Print approx. €10.01–€12.24 excl. taxPreliminary estimate for one variant
Rotary disk for lots of usages, easy to print and build. Print instructions What you need? 1x 608ZZ ball bearing ( https://minm.xyz/9f0da7b8 ) Thats all. After print put bearing to bottom part with some power. Top part (small part )…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Got a second-hand Define R6 case to fill up with drives, but it only came with one useable tray. So instead of paying above the odds for them online, I messed around in Fusion 360 and made my own! Nice snug fit, has the same tab that the…
Print approx. €3.11–€3.81 excl. taxPreliminary estimate for one variant
Use a PC disk drive externally with this cover
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Made this for my wife's new favorite kitchen toy and since the space in our drawers is somewhat limited and all the existing designs I found are all too big, I came up with this design to organize the cutting discs a bit more space…
Print approx. €11.49–€14.05 excl. taxPreliminary estimate for one variant
Case for 2.5” hard disk. Easy install - NO Bolt, Nut or superglue!
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Lost the bean/pea disk for our EarthWay Seeder. Put this one together. Used ABS filament at 50% infill. Used supports and a skirt. Bed at 105C and hot end at 235C. Works fine in our seeder. I've included the FreeCAD project file in case…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
USB C to SATA Adapter for 2.5" HDD/SSD, BENFEI Type C from Amazon.
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter for to connect a vacuum cleaner to an Einhell TC-RS 38 E disk-type sander. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% or more Filament: PLA or PETG Notes: Print with 0.4 nozzle and 0.45mm line…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Wanted to plant a small plot of field corn. Had an EarthWay Seeder, but the corn disk was only for sweet corn and not for field corn. Created this disk based on the newer style of sweet corn disk. Only have 4 holes per rotation which…
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for PETGSource material: PET
Shell for making mirrors from your 3.5" HDD drive platter collection. Shells for 0.6mm, 1.3mm and 1.8mm thick platters.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
kindergarten game: turn the disc and everybody guesses which side will be up. design based on the Regenbogenfisch artwork from the Regenbogenfisch books - i drew the images, scanned and traced them to blender
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
USB C to SATA Adapter for 2.5" HDD/SSD, BENFEI Type C from Amazon.
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for PETGSource material: PET
Simple spindle for your hard disk drive platter collection
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant
Like so many others, I re-invented the Hirth locking joint. Mine has a few features specific to my needs. It is 40 mm outer diameter, 7 mm thick, with a central hole for a ¼-20 or similar bolt or shaft. The central recess is 2 mm deep, 27…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Simple holder for 4 ½" Grinder Disks with screw on clamp. Holds up to 4 disks. Useful to prevent accidental damage while in storage. Recommended to print in PETG with 0.6mm nozzle and 0.3mm layer height, 100% solid.
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Small polishing disk for drill. Requires 4 small screws, one bolt and a sponge. I used bison kit as glue for the sponge and extra second glue between te parts . You can also stick something else to it, such as sandpaper.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
This is a storage solution for sanding discs in 125 or 150 mm diameter. They can be stacked with an integrated connection system and they keep together also without screwing them to a wall or wood. Anyhow for more than 5 pieces it's…
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
I have designed these PS5 skates for a buddy of mine. He was super happy about them so I am assuming they fit well enough
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
This simple box allows tidy storage and prevents curling of sanding disks. The slot in the front allows easy selection and removal of the required grit, and dividers are marked with common grits. This box is designed for 125mm (5") disks,…
I printed with 40% infill ABS for better structural rigidity and heat resistance.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Used the Mark Ruper model of a compliant mechanism dart gun to shoot a disk. I also included some extra material in the model to hold the model down in the front. I printed in abs and the original model lifted. printed perfectly with abs…
Holds alignment stick at different angles. Held in place w/ standard golf tee into ground. Can be swiveled around. 0, 45, 47.5, 50, 52.5, 55, 57.5, 60, 62.5, 65 degrees Stick hole diameter is 8.5mm Tee hole diameter is 6.5mm Lightweight -…
Disque pour tressage kumihimo avec chiffre en relief remix du disque kumihimo 1832378 Un tutorial pour la réalisation de tressages est disponible sur kumihimo.fr --- Si vous voulez me soutenir pour mon travail ou juste si vous êtes sympa,…
Replacement Parts for my Synology NAS DS414. Applied Models: DS211+, DS212, DS212+, DS213, DS213+, DS214, DS214play, DS216, DS216+, DS216+II, DS412+, DS413, DS414, DS415play, DS415+, DS416, DS416play and DS916+ Category: Computer
A floppy disk that can hold up to 1 TB. https://www.youtube.com/watch?v=nez5D-GYKAo&ab_channel=Dehapro
Spooler axis remix for the original design from Miklos Kiszely
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
Hello There I remixed this model and created a version specifically designed for the PS5 Pro Disc Edition . The remix is based on my minimalistic horizontal stand concept, inspired by Matt-G and his stand for the normal PS5 Version. I…
I remixed the original “ Airbrush rotary disk - Prusament spool reuse”. Changes I made: better tollerances, so it fit all over easier together. a small lipp to stop the bearing to slide all the way through I removed the top lipp, so it…
You get those sanding disks in a savings pack, only for them to get dog eared or lost before you use them. The packs usually come in six grit sizes (40, 60, 80, 120, 180 and 240). So have created holders so you can keep the disks in…
The purpose of this item is to house 2.5-inch disk drives with widths of either 0.7mm or 0.9mm.
A disk-like phone and tablet stand, that offers four fixed standing angles: 50°, 60°, 70° and 80°. A central finger trench supports swipe-up gestures, if needed. The stand supports different device thicknesses/sizes and keeps the centre…
These applicators help you quickly align sanding disks perfectly with the holes in the base of the sander. These are designed for the Festool ETS-150 and both the delta and the disk pad for the Rotex 90. See the video here
No change to the original model instructions.
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
3-drawer storage unit to hold 5" (125mm) sanding disks. The drawers are removeable so you can take them to where you need them (the optional retention springs add tension and a soft stopping point when you pull the drawer nearly all the…
Two M3 x 25 screws and nuts for the hinge. Four 5mm x 3mm magnets glued in place to keep it closed. It should print well without supports. I have added the Fusion 360 file for those that may want to tinker with the design. I'm not much of…
This model is made to .3mm tolerance: any 3d printer should be able to be get tuned enough to print this. Plus, this gyro doesn't have a tiny ball in the center that people with fat fingers (like me) can't even interact with. Use my…
The other parts of the original DisKeeper can be stacked on top of this one: 125mm Cover, 125mm Spacer or 125mm bins.
I have created a remix of Zack Freedman's Gridfinity design, specifically focusing on a 4x3 layout that accommodates three 3.5-inch hard disk drives (HDDs). This customized version enhances storage efficiency while ensuring easy access…
Hi I am Engitect, passionated 3d Designers for practical stuff. I hope you will enjoy this simpl design of a stackable sand disk organizer for 125 and 150∅ orbital sander. This design is stackable, print as much as you want. You will find…
Holders for 4.5 inch flap disks or cut off wheels with a 7/8ths arbor. The taller model is 4 inches tall, which should fit in most medium height toolbox drawers. It has its full circumference up one half-inch before the cutouts for…
Holder for 5 cutting disks for Bosch MUM food processor
Fun toy disk launcher I made as a fusion 360 project. It is fully 3d printable and uses a clamp system to launch a disk. Print settings -No supports -Brim for pin -15% infill -5 perimeters for the spring/squeezer! (helps for more power)…
This tool slides in the disk brake caliper and over the brake disk to align the caliper correctly. You can then tighten the screws, insert the pads and if the pistons move freely and evenly, everything should end up nicely aligned. The…
Shaping disk modeled to fit perfectly any Philips Pasta Maker Viva Collection. Mine follows the default 4-hole pattern which is rare for other similar models I've seen. Be sure the printer has the wall flow calibrated, try to reduce…
Build a retro inspired 3.5in floppy disk with PyPortal, CircuitPython and 3D Printing! This small USB drive displays icons and filenames on a color TFT display. Enclosure designed by Noe Ruiz This project was inspired by Dana Sibera, aka…
Designed fot the Philips HR2333 Viva Pastamaker. It should be possible to prepare pasta with the shape of cats. I haven't tried it yet, so let me know if it works! ✌ My print configuration: - ABS - Fill 40%
This 3D printable Kumihimo disk is designed to help you create beautiful Kumihimo bracelets with ease and precision. Featuring 8 evenly spaced numbered slots, this disk allows you to securely hold and organize your threads or cords while…
Don‘t forget to leave a make Kumihimo Disk – Handmade Braiding Tool Beautiful • Functional • Easy to Use Bring your creativity to life with this beautiful Kumihimo disk! Whether you're a beginner or an experienced braider, this disk is…
This is a full size long distance disk golf driver that flies in a straight path. Feel free to look at other things that I have 3d printed on my Etsy shop: https://www.etsy.com/shop/BrownCircle3D?ref=l2-about-shopname print…
It was a blast to make with all the odd shapes like chains and spikes. I learned so many new tools in Blender that I can now make more cool things.
Quick and easy print. Printing: This print does not require any supports. See the last picture for print orientation in slicer (brim recommended) Material: I suggest printing "launcher" in PETG for optimal strength and flexibility. Misc:…
This game rack will fit jewel cases and boxed Famicom Disk System games. 2 different size slots in each section.
SRAM Guide disk brake pads spacer, meant to be used when transporting your MTB without the front wheel on. Remixed from a bleeder I found on https://www.myminifactory.com/object/3d-print-sram-guide-rs-piston-spacer-block-66782 . Print…
Die Scheibe musst du einfach auf das Zahnrad pressen, die Zähne prägen sich in den Kunststoff. Wenn man noch die Schraube ordentlich zuschraubt, hält das sehr gut. Ich habe die Originalmaße im Grunde übernommen, an ein paar Stellen habe…
EDIT 12FEB24: I am not sure when it happened, but all except 4 of the models were corrupted / deleted. I just re-uploaded them all today, so hopefully that won't happen again. – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –…
Disk holder for angle grinder d125
hard disk 2.5 to 3.5 adapter. edit here online with tinkercad You can find all my models here , thank you who will appreciate with a download or with a like
A few features I put into this: 3mm pilot holes in the disk head can be tapped with a 3mm tap, (or just warm up some M3 screws and screw em in). These are for M3x5 or M3x6 Socket Head Cap Screws, which fit into the guide holes on the…
This is a small Floppy Disk Swatch with a Print-in-place design with the top being moveable The size of this model is (50x52x2mm) and uses 5.5g of Filament taking about 24mins to print with a layer height of 0.2mm. I used some 32x32mm…
Feeling DiskInserted? ~Based on the artwork by Zhecon for Magdalena Bay's album Imaginal Disk ~ This model consists is two halves, a nearly symmetrical top and bottom, which "twist lock" together allowing for a CD to be held between them.…
This is a continuation of the Vertical Dremel Bit holder "system" that I have remixed with the Dremel Disc Holders for Milwaukee Packout Bins by benjamenjohnson for my cutting and polishing disks. The holder rails have also been remixed…
Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff
There are two versions of this case available, a cutout version with heat vents (as pictured) or a solid one. The solid one can easily be customized to have your own cutout design. You can use windows 3d maker and Tinkercad together to do…
Rack to hold 12 Crokinole disks. There are 2 versions: a Tournament Size (1-1/4" Disks) and a Traditional Size (1-1/8" Disks).
LUBA 2 mini AWD 800 replacement cutting disk It could fit other LUBA's and YUKA's. Please let me know if it does in the comments and share a pic :) I recommend that you print with something more durable than PLA. It could be ABS, PETG or…
This model is compatible with the lego system.
A holder to store the disk blades of the Kenwood Chef kitchen machine. Printed out of PLA in 6 hours.
A bike disk brake shield. Use: To shield the disk brake from lubricant mist when using spray to lubricate bicycle chain/ drivetrain. Print the model two times and losely connect one end with a zip tie to keep it rotatable. Outer diameter:…
This was originally was only available in ghost cases. I, for the community of xbox modders thought it would be a service to recreate the part for windowed og xboxs or replacements for the ghost cases. I used a caliper to reverse engineer…
As a woodworker, I needed needed a way to store my sanding disks. More improvements are comming … A way to interlock the holders and to hang on a wall if you choose. and yes, the photo shows a 5 inch 320 grit disk in a 220 holder :)
Dell PowerEdge R720 3.5'' Disk Tray with 2.5'' Disk Adapter This model is designed to accommodate 3.5'' disk bays in Dell R720 servers. The model also has 3.5'' to 2.5'' disk converter adapter. So, yo can use any 3.5'' or 2.5'' disk with…
Power Rangers Ninja Storm - Thunder Morpher Discs V3 Model (Final Version) is now available: NO AMS REQUIRED - ONLY 1 COLOUR CHANGE - NO SUPPORTS There are two versions available: No Clip (Display) - Designed to sit snugly on the original…
A simple tub that can hold 125mm grinding disks.
A drink coaster styled after a vintage 3.5-inch floppy disk, with a main base, separate label insert and removable shutter detail. Glue the label to the base and optionally secure the shutter or leave it removable. Prints in three parts…
Extruder visualizer sportcar brake style. To work it needs 4 magnets (8x3mm) to mount the black rear part on the motor of our printer, some glue to attach the magnets to the piece and to attach the caliper in its seat. I choose to fix the…
A storage solution for 115mm angle grinder disks. Add as many compartments of different lengths as you need to store, organize and protect your disks. Printing I've grouped several of the components together to make it easier to download…
I present to you a new cutting disc model for your old ))) robotic lawnmower Worx Landroid WR155e (and same). For assembly, you will need M5 heat-set inserts with a height of 8-10 mm and blades from a BOSCH INDEGO lawnmower. The model…
Disk trays designed to work with NetApp DS4243/DS4246 disk shelves. After five versions I'm finally happy with the design. Empty circles are added to decrease the print material and time required while at the same time not impacting…
Parametric spool alignment disk for the Filament Spool Switcher & Winder for Bambu Lab AMS
Nail art disk. Blank so you can put logo or your own spin on it
Use these models to mount up to 7 or 9 2.5" SSD (SFF) drives to your 120 mm fan. Or mount it directly to the case in place of a fan. Disk mounting holes for standard SSD M3 screws. Print with the backplate against the build plate. The…
Craving the nostalgia of the old computer games I used to play, I created a properly proportioned model of a 3.5" floppy disk and combined its artistic charm with the functionality of a magnet! The model accepts 6x2mm round magnets, which…
This model is modular and can be duplicated for more remotes and disks, I will also later upload a wii nunchuck holder and a separate ps4/xbox controller stand with charging outlets that can connect to this model. Reduce the z axis to…
Since it was not easy for a friend of mine to find a bleed block for the Formula RX disk brakes here in Germany, I designed and printed one for him. The bleed block is necessary when you bleed your brakes to hold the brake pistons in…
Losing ammo for your toys is always no fun. Why not print some more? 20x1mm (and 19x1mm) Disk/"Jet Disc" ammunition for a wide array of toy guns. Most famously, the Cosmoblaster/"Blicky", which is itself a (Russian USSR-era) copy of the…
