2.5" SSD (SFF) disk mount on 120 mm fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount up to 7 or 9 2.5" SSD (SFF) disks on a standard 120 mm fan
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 91
- Makes
- 0
- Views
- 634
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Use these models to mount up to 7 or 9 2.5" SSD (SFF) drives to your 120 mm fan. Or mount it directly to the case in place of a fan. Disk mounting holes for standard SSD M3 screws.
Print with the backplate against the build plate.
The hexagon versions prints without support.
The high airflow models needs supports to print. I have successfully printed with the following:
Type: Tree Auto
Threshold angle: 30 degrees
Recommended material: PETG/ASA/ABS
I think PLA will work, however, under certain circumstances I believe it might get too hot around the drives that it might weaken the PLA.