1 / 6
3.5" tray to 2x 2.5" SSD/HDD slot HP Prodesk 600 G5 SFF
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printed adapter lets you replace a 3.5" drive slot with two 2.5" SSD/HDDs in the HP Prodesk 600 G5 SFF.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1345
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
This 3D-printed adapter lets you replace a 3.5" drive slot with two 2.5" SSD/HDDs in the HP Prodesk 600 G5 SFF. Printed on an Elegoo Neptune 3 Pro with black PETG took 3 hours and 42 minutes to complete. The print used a 0.2mm layer height, with the nozzle set to 245°C and the bed at 75°C, all in an enclosed environment. Keep in mind, it can be a tight fit, so make sure your printer is properly calibrated for the best results.