1 / 6
3.5" tray to 2x 2.5" SSD/HDD slot HP Prodesk 600 G5 SFF
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D-printed adapter lets you replace a 3.5" drive slot with two 2.5" SSD/HDDs in the HP Prodesk 600 G5 SFF.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 148
- Makes
- 2
- Views
- 1,318
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D-printed adapter lets you replace a 3.5" drive slot with two 2.5" SSD/HDDs in the HP Prodesk 600 G5 SFF. Printed on an Elegoo Neptune 3 Pro with black PETG took 3 hours and 42 minutes to complete. The print used a 0.2mm layer height, with the nozzle set to 245°C and the bed at 75°C, all in an enclosed environment. Keep in mind, it can be a tight fit, so make sure your printer is properly calibrated for the best results.