Dual drive 2.5 inch drive caddy for HP ProDesk 600 GT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drive caddy designed to fit in the 2.5 in bay area of an HP ProDesk 600 GT. May be compatible with other cases.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 863
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a caddy I designed to hold two drives for an HP ProDesk 600 GT which I purchased without the original part. It connects with the original locking mechanism and holds securely in place. You will want small (possibly set type) screws to hold your drives in place as this model is a fairly tight fit.
As always non-brittle printing materials are recommended for functional parts. PLA should be sufficient in this case.
A raft and supports are recommended. Choose your orientation based on how your printer prints most effectively and where you need strength.
