HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a second ethernet port to your HP ProDesk/EliteDesk!
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 762
- Makes
- 6
- Views
- 4,701
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other generations of HP mini PCs.
The adapter is designed for this M.2 2.5G ethernet card that can be installed in place of the Wi-Fi/Bluetooth M.2 card: https://www.aliexpress.us/item/3256804124083280.html?spm=a2g0o.order_list.order_list_main.5.b4ba1802r6rPyc&gatewayAdapt=glo2usa
Case Modifications
The screws that attach the ethernet port's metal faceplate to the PCB may hit the the pictured tab as you try to slide the computer's top cover on. If so, use a metal file or coarse sandpaper to remove metal from the area shown in red in the below picture. After the modification be sure to deburr the edges with some sandpaper and clean any metal chips off the top cover before you reassemble.
