Cable Clip Lite (64 sizes)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.09 – €0.11 net (excluding VAT)
For file: Cable Clip 12x8, Single.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.10 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick-printing clip to attach and route thin cables and wires. Includes 64 sizes with channels from 6x6 mm to 20x20 mm.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 146
- Makes
- 1
- Views
- 430
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Quick-printing clip to attach and route thin cables and wires under a table top in various sizes. Only uses about 1.0 g of material for the smallest version and 2.8 g for the largest.
Provided are 64 different variations in size, ranging from 6 mm x 6 mm up to 20 mm x 20 mm for each of the routing channels. Due to the built-in flex inserting and removing cables is very easy.
Each variations is available both as 3MF and STL file.
Thanks to @Print3D for the idea.
IF you prefer a more traditional, closed design have a look at the closed version.
Print Settings
- Print on the side (model files are already correctly oriented
- For best results use PETG, however PLA should work, too
- 0.2 mm layer height
- 0.4 mm nozzle
- 2 perimeters
- No infill required, up to 25 % grid infill doesn't hurt though in my experience
- PrusaSlicer speed profile