Cable Clip Lite (64 sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-printing clip to attach and route thin cables and wires. Includes 64 sizes with channels from 6x6 mm to 20x20 mm.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Quick-printing clip to attach and route thin cables and wires under a table top in various sizes. Only uses about 1.0 g of material for the smallest version and 2.8 g for the largest.
Provided are 64 different variations in size, ranging from 6 mm x 6 mm up to 20 mm x 20 mm for each of the routing channels. Due to the built-in flex inserting and removing cables is very easy.
Each variations is available both as 3MF and STL file.
Thanks to @Print3D for the idea.
IF you prefer a more traditional, closed design have a look at the closed version.
Print Settings
- Print on the side (model files are already correctly oriented
- For best results use PETG, however PLA should work, too
- 0.2 mm layer height
- 0.4 mm nozzle
- 2 perimeters
- No infill required, up to 25 % grid infill doesn't hurt though in my experience
- PrusaSlicer speed profile