Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.04 net (excluding VAT)
For file: This is the code WITHOUT the x axis strain relief / mk3s_x-axis_camer_bracket_s_02mm_petg_mk3s_2h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.85 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.07 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers.
- Rating
- 4.821 / 5
- Likes
- 521
- Downloads
- 2,668
- Makes
- 72
- Views
- 12,305
- Reviews
- 78
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers.
Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.
After finishing my design for the Prusa Mini Pi camera mount I wanted to have the same features on my MK3S. I was always bumping my camera mount knocking in out of position and would not know until I was viewing remote. This became frustrating so I wanted something that has a fixed point of view, is low profile so it will stay out of my way, and was in keeping with the design of the printer.
The X axis strain relief was added in for good measure however there is an option to print without.
Features:
- Compact
- Simple no moving parts
- Fixed Angle
- Cable Management
- Designed to blend with the design of the printer
- Optional X Axis Cable Strain Relief
Required :
1 - Wire Tie 165x2.5 mm
1 - M3 x 18 Bolt
(Both Found in MK3S Spare Parts)
Print instructions
No supports needed.
Note:
Two versions
- With X Axis Cable Strain Relief
- Without X Axis Cable Strain Relief (code found under User Print Files