P
PrintablesMax Mustermann
DryBox Outlet
You need for one outlet: 2EA M3x4x5 threaded brass inserts 2EA M3x10 Cylinderhead screw 1EA M10 PTFE Tube fitting
- Downloads
- 980
- Likes
- 101
- Rating
- 4.83
Search results: outlet
Counting matching models…
P
Printablestomkowski
Bestway Pool Nozzle / Water Outlet
I drew it from scratch based on the original models. The connection diameter and the size of the internal channel have been changed. I also added a few cosmetic tweaks. The connection is about 27 mm and turns into about 25 mm, so it fits…
- Downloads
- 693
- Likes
- 78
- Rating
- 5
P
PrintablesMTang
Reef Random Flow Nozzle for attachment to 17mm straight outlet
Random flow vortex generator for aquarium tanks. Easily push fits on to a 17mm straight outlet (e.g. Readsea Nano). The head snaps onto the connector. The position is held at your chosen angle using friction.
- Downloads
- 252
- Likes
- 23
- Rating
- 5
P
PrintablesSteveJohnsen
Electrical Switch & Outlet Alignment Tool / Jig & Flat Surface Level - for Rectangle switches and Outlets
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
- Downloads
- 236
- Likes
- 49
- Rating
- 5
P
PrintablesSteveJohnsen
Improved Electrical Outlet Alignment Tool / Jig & Flat Surface Level
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
- Downloads
- 235
- Likes
- 78
- Rating
- 5
P
PrintablesSteveJohnsen
Electrical Outlet Alignment Tool / Jig
UPDATE 2024-04-25: I uploaded a new version that has more surface area for gripping the tool, and the safety shield/wings on both sides now cover a wider area, reducing the chance of contact with live wires. NOTE 2024-04-08: I just…
- Downloads
- 190
- Likes
- 45
- Rating
- 5
P
PrintablesTheMakersWorkbench
Hanger Clamps For 4" Outlet 7.8" Diameter Carbon Filter For Indoor Garden / Air Filtration System / Grow
These clamps are designed to fit a carbon filter with an outer diameter of 7.8". These types of filters usually feature a 4" intake/outlet flange, and are often used in indoor gardens, and airbrushing fume hoods. They feature a small flat…
- Downloads
- 169
- Likes
- 79
- Rating
- 0
P
PrintablesBambam
Summer Waves Pool Outlet
Auslass Düse mit reduziertem Querschnitt zur Erhöhung der Strömungsgeschwindigkeit. Ich habe es in PETG gedruckt. Support: Ja
- Downloads
- 41
- Likes
- 6
- Rating
- 0
P
Printablesklew
Protecting children from electrical outlets
Prevents children from inserting metal objects into the socket.
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesShane Kerr
BSEED Zigbee EU outlet wall plate
I wanted to Zigbee outlets so I could track energy usage without using plugs. I ordered some from BSEED, and they are great. Unfortunately the plugs are 50mm × 50mm, instead of what I think is the standard 55mm × 55mm. The outlets I…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesMike
Spacer for Multi Plug Outlet
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesSteve
External Pipe Outlet
One of the more useful and long lasting prints for the house from a few years back. Still in place but area has been tidied up a bit. It's PLA so expecting to have replace it eventually. To save cutting in to pipes it needed to neatly…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesXalexHana
Vimar ISOSET Schuko Wall outlet
Wall mount made mainly for mounting a Vimar ISOSET Schuko outlet/socket to a box, 2 module socket, step file included. better if printed with PETG.
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesMaxb0tbeep
Sleek outlet-mounted Google Pixel Watch charger stand
I wasn't happy with the other charging stand models I printed, so I made this one. It requires an Apple 20W USB-C Power Adapter (just what I had on hand, so, sorry if that's weird) and the charger that a pixel watch comes with. CAD link…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesErrrbody
Doweled dye for 8" half round gutter outlets to hand beat your own
this is a doweled dye that can be used to hand beat your own 8" half round outlets, make the length of your piece 3.84375 pie + your pipe lock size (3/8 or 1/4" should work) and if its too tight take a bit off your diameter * pie number…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
Printables
Water pump nozzle for 13mm outlet
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
P
Printables
Qidi plus 4 toolhead air outlet front
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
P
Printables
Spacer for Multi Plug Outlet
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
P
Printables
Chronograph HT-X3006 Coverplates (Inlet and Outlet)
Modelled these to fit on the cheap chronograph that you can get on Aliexpress (see screenshot). They are replacing the standard plates. I used new M2,5x5mm screws but I think you can also use the original screws with some minor adaptions.…
P
Printables
Yellow Jacket 3 outlet contractor extension cord wall mount bracket
Heavy-Duty mount for the Yellow Jacket 3 outlet 12 gauge “contractor” extension cord. May fit other similar designs. It accommodates #8 wood screws, including cabinet/washer head screws. Printed in PETG. Model is designed to print with…
P
Printables
Sonos One Wall Outlet Mount for US Duplex Receptacles
Use this faceplate for the Sonos One wall mount linked below. https://www.printables.com/model/1195170-sonos-one-outlet-mount
P
Printables
Depth Gauge (for Electrical Outlet Spacers, and many other uses)
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
P
Printables
Doweled downspout pipe for 6 inch half round gutter to hand beat your own doweled 4"(3.84375") starter pipes (outlet(s))
(NOTE: PLEASE REFER TO LAST PICTURE FOR CORRECT SIZING SETTINGS BEFORE PRINTING) make your own sheetmetal half round gutter downspout starter pipes with this jig. this jig is designed for you to stuff a piece of 11.7" paper or pipe…
P
Printables
Elro Outlet Remote Holder
A simple holder for Elro outlet remotes or similar sized remotes.A simple holder for Elro outlet remotes or similar sized remotes. The hollow space is 35 mm x 16 mm. I created one version to be used with double sided tape and on with…
P
Printables
Sicce Whale Inlet/Outlet reinforcement
The Sicce Whale 120 and 200 canister filter inlet and outlet tube to hose couplers may fail at the seam and start leaking. This ring reinforces that seam and can be used as a preventative measure or to repair a seam that has started to…
P
Printables
Wall outlet plate for speaker (or other small low-voltage) connection
This model is quite specific to a requirement I had while fitting out a new room with a surround sound system. Maybe it's useful to someone else too though. This is a wall mount plate designed to take an RCA-style ("phono") connector so…
P
Printables
220V Power Outlet Safety Cover – Screw-Mounted Foolproof Protector
This is a screw-mounted safety cover designed to prevent accidental use of a 220V power outlet in 110V homes . In my house, almost all outlets are 110V, but there is a single 220V socket. Over time, different devices were accidentally…
P
Printables
Neutrik Outlet Dust Cap
Simple friction fit dust cap for Neutrik outlets (NEUTRIK_Outlet_powerCON_nac3f_TRUE1). Can be attached to the cable with a small string.
P
Printables
Table Power Outlet Housing
Table Power Outlet Housing This 3D-printable table power outlet housing is designed specifically for DIY power sockets like the one linked below. It allows you to neatly mount a power outlet on or in a desk or table, with a clean and…
P
Printables
Creality Space Pi Filament Outlet
Does it also annoy you to fumble with the filament in the Creality Space Pi dryer? No problem... just cut a 2mm thin slit into the top and insert my outlet, as shown on the pictures. I did it with a small saw and straightened the slot…
P
Printables
Vimar ISOSET Schuko Wall outlet
Wall mount made mainly for mounting a Vimar ISOSET Schuko outlet/socket to a box, 2 module socket, step file included. better if printed with PETG.
P
Printables
Surface Mount Outlet Box
Had to remove the original outlet box as new things behind it forced relocation, so I needed an outlet box that would cover the large hole and looked nice. Freecad and my Prusa to the rescue. Example pictured printed in PCTG on a Prusa…
P
Printables
Flashforge AD5X Dry Box Outlet Alternative
Dry Box Outlet Alternative This outlet is designed as a PLA replacement for the original TPU plug used in the FlashForge AD5X dry box . While the stock outlet is intended to be printed in flexible TPU, this version uses simplified…
P
Printables
13pin car trailer power outlet plug
a Simple plug for a 13pin car trailer power outlet, if the original is damaged. It simply plugs in the same way as the power cord. if it has too much play in the plug, just use a bit of electrical tape or similar in the inside to…
P
Printables
EdizioDue outlet compatible blind cover (Blinddeckel)
Strangely the blind covers (needed when the outlet is unused) for EdizioDue outlets are not very available and almost as expensive as an actual outlet. Since I prefer the screwless type and I couldn't find it, here is my own version of…
P
Printables
Outlet Cover With Philips Toothbrush Holder
This cover fits over a standard single gang rectangular outlet cover and holds the charger for a Philips toothbrush. Because it goes over an existing cover, longer screws may be required for installation.
P
Printables
VAG Cars Rear Air Outlet Vent Cover
I added holes to the exits to prevent things from getting inside.
P
Printables
Kickass 240V Portable Air conditioner - Upright hot air outlet adapter
Kickass portable A/C adapter that allows the hot air outlet flexible hose to come out from the top of the unit. It helps save space behind it, allowing to place the unit in small areas, such as caravans, vans, and cars. Printed with PLA,…
P
Printables
Simple Outlet Spacer
Easily lengthened or shortened to suit your needs. 8mm length was perfect for my application.
P
Printables
Outlet Cutout Template 2x4
Actual size is roughly 2.25" x 4.25" to account for fitting the outlet box, clips and/or any wires into the hole while still being covered by the outlet's faceplate
P
Printables
Accessory Power Outlet (cigarette lighter socket)
Accessory power outlet/auxiliary power outlet/cigarette lighter socket I couldn't find any existing models that are robust, so I made it instead. This socket uses a hose clamp and some fasteners. It can be used inline, or mounted to some…
P
Printables
MSA Millennium Outlet Cover and Camera Mount
This is a replacement cover for the MSA Millennium gas mask outlet. It uses M3x20mm screws to hold it together. The holes are snug, so nuts may not be needed, but there are provisions for them for a stronger hold. One of the top parts has…
P
Printables
Lucky-Kitty Keramiktrinkbrunnen Wasserauslass / Ceramic cat fountain water outlet
Replacement water outlet for the original one, with a bit of downward angle. Due to a new pump with too much power i had guide the water down to stay inside of the fountain. Best would be to use something like PETG due to food safety.
P
Printables
DeWalt 20V to 12V Multi Power Outlet with Light, USB, Magnetic Base, Tripod Mount
This started out as just a battery powered 12V car accessory outlet that evolved into this finished model. The main printed parts are the main case, handle, and base. Not knowing if extended use pulling several amps would heat up the…
P
Printables
120mm Window Exhaust Vent Outlet for Fume extraction
This vent is mounted in a blanking plate in a window opening to typically exhaust fumes from a 3D printer and interfaces to a 120mm fan or duct. 2 design variants are included Thread insert version 4mm thread, 4mm deep 3.3 mm hole for…
P
Printables
Portable 2 Gang Outlet Box - TPU Version
Pictures with the strain relief coming soon. I seem to have run out. Safety Disclaimer: this project involves working with electricity. Please make sure you know how to be safe before attempting. Please also be aware of the…
P
Printables
Doweled dye for 8" half round gutter outlets to hand beat your own
this is a doweled dye that can be used to hand beat your own 8" half round outlets, make the length of your piece 3.84375 pie + your pipe lock size (3/8 or 1/4" should work) and if its too tight take a bit off your diameter * pie number…
P
Printables
flat 3.875" outlet for hand beating your own outlets for downspouts
here is a basic flat pipe for hand beating your own outlets for downspouts. make your piece height 2.875" to flange .375" and length 3.84375" x pie + your desired pipe lock size(3/8 / 1/4" should work fine) and form the pipe and stuff…
P
Printables
Outlet Locker Top/Bottom Access
This remix is just a modification of the original design. By removing the front slits and adding holes to the top and bottom, it allows the cables to be routed a bit more cleanly but still prevents children from gaining access. I will…
P
Printables
Homepod Mini Holder Wall Outlet (Remix)
This is a combination HomePod Mini holder and outlet shelf. I liked the outlet shelf designed by JordanBurghoff, but wanted to install this in a childs room. I merged in the mount portion created by Bradslee to hold the HomePod Mini a bit…
P
Printables
Safety EU Electric Outlet
Safety plug,cant be removed by hand,but when you need to plug something it is fast and easy.
P
Printables
Outdoor Exterior Outlet Cover
This is an outlet cover I made for our house, which is part of one of those contractor-built neighborhoods. I suspect this is a pretty standard outlet box. This one does not snap with the latch, which is intentional as the previous one…
P
Printables
4 inch inlet to dual 4 inch outlet Y splitter
On a 220x220 build plate rotate the model 45 degrees and it will fit.
P
Printables
Dual Outlet For Spool Holder To Reverse Bowden
Dual Outlet For Spool Holder To Reverse Bowden
P
Printables
Outlet Safety Cover NEMA 6-20 / 6-15
This is a remix of https://www.printables.com/model/602279-outlet-safety-cover with the the main prongs rotated to be compatible with NEMA 6-15 & 6-20 240 volt outlets Now the 3 other people that have these outlets at home can print their…
P
Printables
Water Nozzle for 20mm PVC Pipe – High Pressure Jet (6mm Outlet)
Simple and effective water nozzle designed for standard 20 mm PVC pipe. This nozzle smoothly reduces the diameter to 6 mm, creating a strong and focused water jet with increased range. Perfect for DIY water filters, pumps, or any setup…
P
Printables
Philips Saeco LatteGo Outlet Nozzle Valve Insert (Spring Part) – 3D Print Replacement
This is a replacement internal valve insert for the Philips Saeco LatteGo outlet nozzle . The original part is attached to a small spring inside the nozzle and controls water flow and sealing. This model replaces only the internal moving…
P
Printables
Echo Dot 3 outlet holder (north american edition)
made some changes to the original model to better suit my canadian outlets, figured i would remix it for others.
P
Printables
attachment for air outlet of mobile air conditioner
My mount from the old mobile air conditioner broke, but I couldn't find a new one. So I decided to do it myself). It might be useful to someone. My air conditioner model : airsonic ps-12 comfort
P
Printables
Remix for 5015 with a smaller air outlet
I slightly redesigned the model for my creality HI fan, maybe it will be useful to someone.
P
Printables
Remixed bucket for pond water outlet
I closed the hole in the bottom and added a thread to attach the hose. I used this: https://www.printables.com/model/214369-14-npt-male-12-hose-barb-fitting to attach a standard 1/2" / 13mm garden hose.
P
Printables
onn 10.1 tablet wall mount for recessed outlet
I couldn't find a good wall mount for my Onn 10.1 tablet (2024). Existing mounts had problems: too big / bulky, multiple parts, didn't fit because of tablet versions, etc. I use this tablet for home automation dashboard. The recessed…
P
Printables
outlet cover childproof - Italian Type L 10A 16A
Copripresa a prova di bambino. Compatibili con prese tipo L italiane da 10 Ampere e 16 Ampere, con pin della messa a terra e senza. Ho creato il tutto rispettando le misure degli standard delle spine elettriche di tipo L. C'è anche un…
P
Printables
Oversized standard outlet cover plate
A larger than normal single gang wall outlet cover plate. Outside dimensions: 130mm x 90mm
P
Printables
SIGURO AC Cold outlet hose adapter
It requires dissasembly/removal of the existing cold port shutters and things Then it is a semi-tight press fit into the plastic housing.
P
Printables
Outlet Cover
Its a outlet cover to hold charging block. I hated waking up to a dead phone.
P
Printables
Rancilio Silvia 3_Way Outlet Spout
This spout helps the Silvia 3-way valve water discharge into the stainless-steel drip tray and not into the base of the Silvia where it will promote corrosion long term. To further mitigate corrosion, I've put some 2mm thick EVA foam…
P
Printables
Beer themed outlet covers - Coors, Hamm's, Miller & Pabst
I have a beer sign collection and thought this would be appropriate for the room. Hope you like them! These are oversized plates. Print with a color change at .8mm and then again at 1.2mm 4 separate files to choose from. Print one or…
P
Printables
roller shutter strap outlet
When we renovated our bathroom, the tiler simply tiled right over the roller shutter strap outlet. Of course, there was no replacement part available for something like that. The hole in the tile measures 30 mm by 30 mm. It stays in place…
P
Printables
Amazon Echo Show 21" Recessed Outlet Box
A recessed outlet box that fits the middle of the Echo Show hanging bracket.
P
Printables
BSEED Zigbee EU outlet wall plate
I wanted to Zigbee outlets so I could track energy usage without using plugs. I ordered some from BSEED, and they are great. Unfortunately the plugs are 50mm × 50mm, instead of what I think is the standard 55mm × 55mm. The outlets I…
P
Printables
Ventilation Ø 100mm Straight plus 2 outlets
Parts for connecting 100m ventilation ducts/tubes. Here the part is a 1 inlet straight to an outlet plus 2 other outlets. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print…
P
Printables
Electrical Outlet Stand-off Spacer
NOTE 2025-04-23: I just uploaded a depth gauge, which will make it very easy to determine the gap between the wall and electrical box faces. This gauge makes selecting the correct spacer thickness quite easy. That model is here: NOTE…
P
Printables
(Parametric) US Electrical Outlet Cover
This fully parametric model can generate outlet covers for US electrical outlets. The model supports from 1 to 10 gangs and the following gang types: Blank Duplex Rocker Switch/GFCI Toggle Switch Keystone Nema L14-30 Coming soon: Phone…
P
Printables
Toothbrush charger power outlet shelf
9/9/2025 Update: If you are going to print the 1-piece outlet and with cord storage, then I highly recommend using support material for interface. I normally use PLA to print and I use PETG for the interface, but in this case I used PETG…
P
Printables
Modular Outlet Shelf for Phillips SonicCare
Dangly wires and bathroom clutter are a thing of the past with the Modular Outlet Shelf! Instructions Remove the screws from your existing outlet cover, leave the cover in place! Place the 3d printed outlet cover OVER your existing one…
P
Printables
External Pipe Outlet
One of the more useful and long lasting prints for the house from a few years back. Still in place but area has been tidied up a bit. It's PLA so expecting to have replace it eventually. To save cutting in to pipes it needed to neatly…
P
Printables
Mounting Clip for Aqara "Wireless Mini Switch" in Schuko (CEE 7/3) Outlet
I needed to fix an Aqara “Wireless Mini Switch” to the wall next to the existing light switch. As we do not need the outlet below the switch and this also was just a temporary solution, I decided to quickly make a mounting clip that would…
P
Printables
Electrical Outlet Alignment Tool / Jig
UPDATE 2024-04-25: I uploaded a new version that has more surface area for gripping the tool, and the safety shield/wings on both sides now cover a wider area, reducing the chance of contact with live wires. NOTE 2024-04-08: I just…
P
Printables
Extension Cord Hook Outlet Cover
Streamline your garage or workspace with our Extension Cord Outlet Cover. This wall-mounted holder offers a tidy solution for keeping your extension cord elevated off the ground, all without the need for drilling holes. Crafted with…
P
Printables
Outlet Baby Cover
This outlet cover will protect your plugged in electronics from those meddling kids.
P
Printables
Improved Electrical Outlet Alignment Tool / Jig & Flat Surface Level
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
P
Printables
Electrical Switch & Outlet Alignment Tool / Jig & Flat Surface Level - for Rectangle switches and Outlets
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
P
Printables
Aquael fan mini filter outlet / Aqarium filter ending
Printing advises: Print with brim 0.25 mm nozzle is best layer height >0.15 mm Print in orientation shown on picture 3
P
Printables
Light Switch/Electrical Outlet Spacer
I tried installing a new dimmer switch, but didn't have enough room in the box, so I designed a simple spacer to hold the switch 1 cm away from the wall to give it a bit of extra room. This model is sized to work with this Light Switch…
P
Printables
Protetor minimalista para tomada padrão brasileiro / Minimalist dust cover for Brazilian wall outlets
*English text below* O objetivo desse protetor não é impedir que crianças coloquem a mão na tomada, e sim apenas impedir que poeira e sujeira acumulem na parte externa das tomadas. O diferencial desse protetor para os outros é, além do…
P
Printables
Linksys Velop Electrical Outlet Mount
I downloaded this print...https://www.thingiverse.com/thing:2657972 quickly remade it into: https://www.prusaprinters.org/prints/100340-linksys-velop-wall-mount-remake Then realized that I needed one of my nodes to take up an outlet…
P
Printables
SpiroTech Sludge Separator Outlet Valve Knob
A simple handle/knob for turning the outlet valve of a SpiroTech sludge separator. It fits perfectly on the valve axis and sticks there slightly. In the handle, there is some space for 10x3 mm magnets (e.g. 30x10x3 mm), so the handle can…
P
Printables
Babyproof Outlet Cover
I liked the original design but the thick sides for the command strips add a lot to the filament usage and print time. I slanted them so you still have the same amount of room for the command strips on the wall but the front is about as…
P
Printables
Outlet Cover
I liked the style of the original model but with prongs being printed vertically they are easy to break off. I redesigned it so the prongs are printed horizontally. Conveniently this also makes room for the usb plugs in my outlets.
P
Printables
Vilo Wi-Fi Mesh Wall Outlet Hanger
It's designed to exactly fit 180mm printers like the Prusa Mini. I used OpenSCAD with the BOSL2 library, so if you're interested, you can poke around and change it for your own liking. It's designed to fit an European outlet, but if you…
P
Printables
Air Conditioning Water Outlet
A 3D-printed air conditioning water outlet is a custom-designed component that allows for efficient drainage of condensate from air conditioning units. These outlets can be tailored to fit specific installation requirements, ensuring…
