4" Exhaust Outlet for xTool P2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The same mounting and geometry as the OEM 3" outlet. Reuse the same hardware that came with your P2. We used ABS
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 421
- Makes
- 0
- Views
- 1,727
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The mounting areas has the same geometry as the OEM 3" outlet, but this will fit a 4 inch dryer hose. Reuse the same hardware that came with your P2. Just remove the 4 screws that hole the 3" unit in place. Then install this 4" outlet. There is also a gasket file on Printables that you can cut on your P2. If you don't want to print this one there is a better version available here https://www.copperdog3dprinting.com/home/4-Exhaust-Outlet-for-Xtool-P2-p561395080
Please donate a few bucks to help these files to continue to be shared for free.