Counting matching models…
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Simple case for a Banana Pi BPI-P2 Zero with PoE add on I printed it in PETG, it gets a little warm with the PoE ad-on
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
I needed a vent adapter for the hose coming from P2s/Ap2 to the 4" vent that goes outside. I couldn't find anything so I made this. It works pretty well for my application. It fits pretty snug but I did have to use tape to create a more…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Disclaimer Follow all applicable safety precautions (consider watching xTool’s laser safety training) when operating a P2 or any other Class 4 laser. Monitor the laser cutter at all times. Motivation It is hard to get a good look at how a…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
Corner Bracket for mounting Aqara FP2 Presence Sensor into a corner. You can use the metal plate and fix it with the screw or the 3M. I have print it with Prusament PETG on a Prusa MIni and 20% infill.
This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
Simple corner mount for Aqara Presence FP2. Assembly Insert metal circular plate from Aqara Presence FP2 box (good enough fit, no glue necessary as it will be hold by magnet anyway) Glue double side 3M tape on areas touching the wall or…
A corner bracket for the Aqara FP2. I wanted to cover my whole room with the FP2, unfortunately the FP2 can only see 120 degrees, for the whole room it should have been 180. So I decided to mount the sensor in the corner. To make this…
Other mounts were comprised of multiple pieces, lacked sufficiently large/deep wall mount points, and/or lacked exterior ring to support magnetic attachment, so here's another corner mount for the pile. Enjoy. Updated to V2: Mount holes…
Wall mount support for aqara FP2 with 45° angle. Follow me if you like this
A small stand I made to hold my FP2 upright on a table
Having experimented with various designs I found online, I eventually decided to create the ultimate corner-mounting bracket for the Aqara FP2 presence sensor. Through a series of trials and adjustments, I perfected the design to achieve…
Should also work with a P30 Pro. This design is for the preinstalled Volkswagen Passat B7 phone socket. For a easy printability I have created three parts. This design allows the usage of the fingerprint sensor and also allows plugging in…
Der Halter gibt einem die Freiheit den Aqara FP2 so auszurichten das er den Raum bestmöglich abdeckt. Das ermöglicht die montage an mehreren Plätzen so wie es am besten passt.…
Arylic Up2Stream Mini V3
This 3D printable logo set is inspired by the Bambu Lab P2S printer and includes three different versions : 1 Bambu Lab P2S – full logo version 2 P2S only – minimal style logo 3 Bambu Lab P2S (engraved 0.01 mm) – designed for multi-color…
This is a tiny case for a XIAO esp32c3 board with room for the wifi antenna and a AHT20 + BMP280 sensorboard (Ali). the pcb's are held in place with a clamp and can easely be installed and removed. the case back snaps to the top without…
I designed this smart sensor holder so you can mount the Aqara FP2 mm presence sensor into the wall corner, or, if you would like, all the way at the upper room corner easily, with space to feed the usb cord into the mount while…
Small key to reset Fire alarm or panic alarm etc, whatever uses FP2 key. Just be aware key only needs to turn about 5 degrees or so until resistance is felt, don't try to turn fully as this is unnecessary and may snap the key. Print as…
This is a fixed height riser for the xTool P2/P2S. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine approximately 36mm for engraving cylinders with larger…
Corner mount for the Aqara FP2 sensor. Adjusted to fit non sharp corners (like with wallpaper)
What this is Mount your Aqara FP2 to a corner without drilling! Using 3M command strips (picture hanging strips). Materials From the Aqara FP2 box, the original metal mounting plate From the Aqara FP2 box, the original screw 3M Command…
This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive
I designed this holder to mount Aqara FP2 the presence sensor almost parallel to the wall (pointing into a hallway). The metal plate that comes with the sensor for the magnetic base can be screwed on the tilted plate. The holder itself…
This is an adapter that converts a DELL monitor stand into a VESA stand. Compatible with stands labeled “FFT-ZS”. Please let me know if you can use this model other than those listed below. UP2516D UP2716D U2717D Print setting Layer…
The bottom-left part of SiCK-68 keyboard modified to accept a Waveshare RP2040-Zero microcontroller . Has a snug opening for the USB-C port and the controller is fully constrained – you won't be able to wiggle it loose using a USB-C…
Servohalter SG90 Clickbefestigung mit Clickdeckel Seht euch auch Typ1 und Typ3 an.
Macropad with RP2040 and CircuitPython See HERE for a write-up on my website with pictures Most DIY macropads I could find on the internet were either too expensive or had too many features for my needs (knobs, displays, etc). My goals…
A simple speedloader for the Swiss military 9mm pistol P220 / P75 with single stack magazines. Possibly works for P210 as well. Print as is standing on the cross without support.
This is a neat shell I made for a pentel P207 (It can also be used for the pentel P205 with no issues) Be careful with the bed adhesion for this one, I would use a brim. Depending on the filament used you may be in for some more post…
A mount for the Aqara Presence Sensor FP2.
4x2 Gridfinity organizer that holds the Nelko P21 + several tapes. With Gridfinity Refined base
Replacement case for the Simagic P2000 Haptic Control board. Blocks the extremely bright LEDs to avoid lighting up your room. Newer "p2000box_2" tops have increased tolerances for the USB connector based on comments. Closed version is…
Diese 3D-gedruckte Halterung ermöglicht die elegante Unterputzmontage des Aqara FP2 Präsenzsensors. Sie ist so konstruiert, dass sie passgenau in ein Standard-Unterputzloch (Ø 68 mm) passt, wie es in Europa für Steckdosen üblich ist. Die…
GIMX enables to cross use peripherals with many of gaming platforms. You'll need a dongle like this (atmega32u4) and the computer (Rasberry PI3, PC, ...) with the GIMX SW. More info: gimx.fr Category: Games
I wanted to hide the bright green LED and I needed a way to mount the controller to my rig, so I came up with this box. You'll need to flip the lid when you print it, so the side with the letters is facing up. Otherwise, I don't think the…
Designed to fit a custom PCB using just these 2 components. Gerber for the PCB is also attached. It is a very simple design but may be updated in the future to also include a BME280. Uses an ESP-32S Development Board and the LD2410C Human…
Replacement flag for the Step2 KidAlert street safety sign. Our original vinyl flag was torn off at some point and needed a new one. This was designed to fit over the roughly 6.3mm fiberglass pole, but should fit other similarly sized…
Aqara FP2 Wall mount 45 Degrees. Power supply goes inside a so called “UP-Dose” :-)
This is a Stacking bracket for Werner1107's Arylic Up2Stream Amp v4 case . It is spaced to allow air-flow from the case top vents, with a thin lip to keep the cases stacked.
Spindelabdeckung für Deckel FP2
Stackable housing for the Arylic UP2Stream V4. As I wanted to stack two of these devices on each other I made this housing. There is one upper half with and one without pocketholes. On the bottom of the foot there are small spaces for 6mm…
Use M3 screws and nuts to secure sensor Print Settings 100% infill Use flexible materials, like PETG
this is a simple air vent diffuser should clip into the p2s air vent, but please contact me if there are any issues(new to fusion so any feedback would be great :) MAKE SURE TO PRINT IN PETG-this is mainly due to petg having a good heat…
I wanted a cup to make sure my sensor did not move.
Bracket for a 60 mm flush-mounted box
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
I got this Nelko label maker for like $10 at micro center. Modeled out this simple holder to store it on my SKADIS pegboard. It slides in/out easily but the holder is tight enough that it won't fall out. Print settings don't matter too…
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
A headphone holder for the P2423DE Monitor by Dell. I am not 100%, but they might also fit on other stands of the Dell P-Series Monitors. The Monitors are used in my school, so I printed those holders in bulk. They work perfectly well and…
Seeed Studio XIAO RP2040 is compatible with the Raspberry Pi RP2040 ecosystem as they share the same RP2040 chip. It supports multiple languages including C / MicroPython / CircuitPython. This will be a great tool for you to get started…
Aqara FP2 Wall mount 45 Degrees. Power supply goes inside a so called “UP-Dose” :-)
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
This is a remix/repair of the 90-degree vent hose model from RobertCowen for the Xtool P2 and P2s. The models that he has posted for this specific part have artifacts present in them that stop both the 3mf and STEP files from printing…
The wood strips are 275x10 mm with a max thickness of 13.5mm. They are made to be slid in from the back and glued. Printed at 0.08MM layer height to mitigate drooping on the overhang (made to match the stock panel) (I laser cut the strips…
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
Slide-in, 3 buttons, LED openings Inegrated supports (separate bodies - easy to get rid off in slicer) You can find source for the rp2040rgb board here: https://grabcad.com/library/rp2040-rgb-simple-model-1
Screw caps to make your H2D / H2S / H2C / P2S/X2D look more refined. PLA works the best and there are no issues when printing with high-temp materials. Please note that my main platform is MakerWorld, where you can find more of my work:…
This is a holder for a standard pinwheel that can be added to a Step2 push buggy. Print on side for durability. To install, unscrew one of the screws holding down the dash of the buggy, place holder, and screw back in.
Gridfinity 4x3x6U P2S toolbox w/ tray insert. This is a modified version of my A1/A1 Mini insert. I believe P2S and H2 series use same hotend, so this should work, except for the silicone sock which H2 Series is different. As for the…
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…
A case for Waveshare RP2040 Zero with the possibilty to glue in a 2pin jumper connector, meant to be used as a temperature sensor inside a pc. https://github.com/Ranatos/RP2040-Zero-liquid-temperature-sensor
Hardware needed : x4 12-14mm M2 screws to secure bottom plate x6 mechanical switches of your choice x1 RP2040-Zero microcontroller x1 8-bit RGB LED x4 10mm rubber pad 30AWG Wrapping Wire Solder iron Transparent Double Sided Polyester Tape…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) BAMBULAB P2 + H2 SERIES…
🧹 Cleaning Tool for P2S A practical cleaning tool designed for Bambu Lab P2S (and compatible parts), created to make it easy to remove leftover filament, dust, and debris from hard-to-reach areas. The model is easy to print , durable, and…
New version with better fit and thicker walls for more strength. This is for any printer with a door that has a gap at the top of the door. Mount for a Tapo C101, C110, C111, or C110P2 camera.
Since there are not a lot prinatbles for the Sunlu SP2 i've designed a desiccant box for it. The box ist fitting well on the bottom of the dryer. Just insert silica gel larger than 1,5mm in diameter. Just printed it with PETG on standard…
Mounts on 2-3 multiboard "Fix points" (I was calling them multipoints until this morning, guess they've been renamed). Standard 0.2mm 15% should be perfectly fine, I used 0.12 in the pictured print. Elephants foot in the original photo…
This model is for those that purchased an xtool metalfab bundle package that includes the AP2 Max and did not receive the 8" exhaust hose adapter. If you want one, you need to contact support and it ships from China. I printed this and…
P2000 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
This poop basket doesn’t extend beyond the printer’s overall dimensions, so the printer can be placed flush against the wall. Two m3 bolts (11-12mm) are needed to attach the base to the printer. The container then slips onto the base with…
Bambu Lab P2S Silicone Foot Mold / Vibration Dampener Mold This is a 3-part casting mold designed specifically for the Bambu Lab P2S 3D printer feet. Important Note Please note that my Bambu Lab P2S printer has not arrived yet , so this…
do not print the mk1 rotator.
A 3D-printable housing for the MyScale KP20488 bluetooth scale (~15 EUR on AliExpress). Designed to fit on the Gaggia Classic drip tray while maintaining bluetooth connectivity for Gaggiuino and Gaggimate integration. The model transfers…
Ever since I bought my 3D printer, I've been planning to design a custom enclosure for this device. Until now, the wires were just a mess, constantly getting caught on things or coming loose, which caused reliability issues. I finally…
The original blade holder on the Lightsaber RP2040 had two main issues: It was too long and didn't allow the emitter to screw down the entire way. It was slightly too loose for the Ultrasaber blade I was using. This remixed design fixes…
le Bord ne fait que 3mm de largeur Imprimez dans le filament que vous voulez
IEC C14 mounting socket for Meanwell SP series power supplies
Keep your Bambu Lab A1, A1 Mini, P2, or H2 nozzles organized and accessible with this ultra-minimalist Multiboard mount. Inspired by this design , I’ve optimized this version to be as efficient and fast-printing as possible. Why this…
I redid the lid of the box, now it just fits snugly. This is a great case for a mobile phone fast charging adapter. https://aliexpress.ru/item/4000421962093.html?sku_id=12000032850140428
xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm) This custom-designed mount adapts a 600x300mm honeycomb panel to fit perfectly inside the xTool P2S laser cutter. The Problem and Solution When cutting materials like acrylic on the…
The Simagic P2000 Throttle Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These…
The Simagic P2000 Brake Pedal Plate is designed to give you more precision and flexibility when fine-tuning your pedal setup. For installation, you will need M6 thread inserts (outer diameter approx. 7.8 mm, length 10 mm). These inserts…
BAMBU P2S Ikea Platsa FAN 120 cooling system and temperature controller. We all know that the printer inside the cabinet is fine, but the temperature inside is high. We need a system to lower that temperature, and we can achieve this with…
There are plenty of these available but my design holds the module tightly inside the housing. In addition, the single screw hole is through and through so it's possible to use the same M3 bolt to hold the housing together and secure it…
Removed "P02" lettering. Edited Rail into an classic Picantinny Rail. Fuzzy skin for Grip on the handle. Check out the original model by Useless Ideas!!!
Removed the original lettering with an realistic "Sig Sauer P250". Please print it like the original modell with the Muzzle facing down!! Check out the original model by Useless Ideas!!!
![[NEW MODEL IN PROGRESS] aca hurricane for bambu lab p1s,a1,p2s,x1carbon,p1x.](https://media.printables.com/media/prints/55883b49-4d4a-468d-a4a6-6d6f6183a293/images/11966674_69c73a7e-5c14-4dd2-9835-69644495fba5_4653c231-e623-4181-b439-b9ea06d951a2/chatgpt-image-dec-21-2025-08_54_53-pm.png)
