1 / 3
Aqara FP2 corner mount w/ adhesive (3M picture hanging strips) — image 1
1 / 3

Aqara FP2 corner mount w/ adhesive (3M picture hanging strips)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount your Aqara FP2 to a corner without drilling, using 3M command strips (picture hanging strips).

Rating
5 / 5
Likes
5
Downloads
106
Makes
1
Views
868
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

What this is

Mount your Aqara FP2 to a corner without drilling!

Using 3M command strips (picture hanging strips).

Materials

Instructions

  1. Print the part
    1. Ensure minimum thickness (5 layers worked for me) so that the perimeter around the hole is strong enough to hold the self tapping screw
  2. Place metal mounting plate over the side with the hole, align the holes
  3. Insert the original screw into the aligned hole
  4. Tighten until the metal plate is secure and does not spin
  5. Place and secure one 3M strip on the side with the indentation (cut strips to size)
  6. Using a flat surface, push on the other 3M strip
  7. Remove the backing and push onto wall.  Hold for 60 seconds

Tags