1 / 3
Aqara FP2 corner mount w/ adhesive (3M picture hanging strips) — zdjęcie 1
1 / 3

Aqara FP2 corner mount w/ adhesive (3M picture hanging strips)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your Aqara FP2 to a corner without drilling, using 3M command strips (picture hanging strips).

Ocena
5 / 5
Polubienia
5
Pobrania
106
Wydruki
1
Wyświetlenia
868
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

What this is

Mount your Aqara FP2 to a corner without drilling!

Using 3M command strips (picture hanging strips).

Materials

Instructions

  1. Print the part
    1. Ensure minimum thickness (5 layers worked for me) so that the perimeter around the hole is strong enough to hold the self tapping screw
  2. Place metal mounting plate over the side with the hole, align the holes
  3. Insert the original screw into the aligned hole
  4. Tighten until the metal plate is secure and does not spin
  5. Place and secure one 3M strip on the side with the indentation (cut strips to size)
  6. Using a flat surface, push on the other 3M strip
  7. Remove the backing and push onto wall.  Hold for 60 seconds

Tagi