Counting matching models…
Holder for Aqara/Xiaomi door magnet sensor for gas meter used in Europe countries. Reads the magnetic impulses and parsing them using in HomeAssistant for measuring the gas usage. Disassemble the Aqara sensor (carefully so you won't…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
A wall mount for the Aqara IoT Button
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
I found a couple of other mounts for this sensor but I wanted an even more slim and reduce build time and plastic used / cost so I designed my own. This is my first model created for 3D-printing. I made 5 iterations to get to this stage.…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
A small holder for Aqara Motion Sensors. It has a hole for M5 screws. You can also use doublesided-tape to mount it.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I recommend using GCODE or 3MF as I used different infills for different parts. If it will not work 100%, simply use rasper… Remix : https://www.thingiverse.com/thing:4385429/
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example. Printing, I used organic supports, overhang threshold at 30 degrees. Used…
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for PETGSource material: PET
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
A simpel stand so the sensor is not laying on something. Standard is tight fit and angle of 30 degrees. Easy print with supports. I used organic supports.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Print Instructions: You have two options: ⬢ Use the presliced G-code and print it on your MK3s+ ⬢ Slice your self using the following settings ⬢ Print settings: 0.20mm QUALITY ⬢ Fillament: PETG (tested on Prusament) ⬢ 15% infill Step1:…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Corner and flat mounts for Aqara sensors - The corners are overly large as to cover / match the anchors of existing sensor mounts I had. Print instructions Prints without supports. Each type requires a sensor 'cup' to be printed with it,…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Holder for an Aqara Vibrarion sensor to detect opening of the letterbox. Print on left side - no supports needed I used PETG with 0.6n
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Parts list: 2 Magnets in 5x3 mm I experimented with smaller magnets but they did not give me consistent results, but the thicker Base fits nice. If anyone wants i can make one for Round Handle Bases, just leave a comment. Assembly…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Install a Aqara Zigbee Button behind a Clipsal Iconic 40 Series plate for situations where you can't get power to the back of a plate.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
I created this spacer because I noticed that the faceplate for the Aqara switch didn't sit flush against my wall and that the wires were quite cramped. This solves both issues eliminating the gap between the faceplate and the wall, while…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
The case for the Xiaomi Aqara thermo and humidity sensor to hang in my greenhouse. Obal na zaveseni Aquara cidla teploty, tlaku a vlhkosti do skleniku.
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
A collection of mounts for various Aqara sensors. Will grow as I get more stuff. Prints solid, no supports, large surface down (lock ring upside down). Can barely see them if printed in white. Mounts will work with or without tape…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Corner Bracket for mounting Aqara FP2 Presence Sensor into a corner. You can use the metal plate and fix it with the screw or the 3M. I have print it with Prusament PETG on a Prusa MIni and 20% infill.
Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.
The protection was created due to the lack of cover from meteorological conditions. The manufacturer recommends covering from rain. For those who use an angle pad, an auxiliary plate must be added between the cover and the angle pad. At…
I wanted to get a notification, when I needed to change silica. I remixed @Thomas_63847 model to fit my Aqara Sensor. Printet with tree support.
I've created this waterproof case for my sensor. It is o) easy to print (no support needed) o) easy to assemble - just 2 M2 Screws o) no specials needed - just a standard a rubber ring o) easy to mount (zip tie or double sided tape) The…
Mount for an Aqara temperature, humidity and pressure sensor. Provides shade from direct sunlight and some protection from the elements. Suitable for use in a sheltered location such as a porch or balcony. The mount has a single hole for…
The bracket features 2x 4mm mounting holes for screws to mount the bracket to a wall. There’s a hole underneath the camera for a standard ¼” screw to mount the camera to the bracket. The bracket has a slot in the bottom for the USB-C cable.
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
I have many Aqara Zigbee thermometers around my house and it's a pain to change the batteries once a year. Two AAA batteries should have much more capacity than CR2032 cell. This case houses the sensor and two AAA batteries inside. It…
Simple corner mount for Aqara Presence FP2. Assembly Insert metal circular plate from Aqara Presence FP2 box (good enough fit, no glue necessary as it will be hold by magnet anyway) Glue double side 3M tape on areas touching the wall or…
A decorative housing for outdoor mounting of the Aqara temperature and humidity sensor. Includes ventilation grill at the bottom. Prints without supports.
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
A corner bracket for the Aqara FP2. I wanted to cover my whole room with the FP2, unfortunately the FP2 can only see 120 degrees, for the whole room it should have been 180. So I decided to mount the sensor in the corner. To make this…
i wanted to know when my wooden backyard fence's gates are open, so if the mowers or poop scooper people leave it open, i'll know with automation. these are ugly and low effort, but they work. these are for wooden fences, and the holes…
I created this one to save some space in the house [: I have used a black generic PETG (from 3DN) for printing. #nosupports are needed Like what you see? Click an image below and…
I hate to glue these sensors to the wall using attached double sided tapes. I'm using this minimalist mount to fix them.
Other mounts were comprised of multiple pieces, lacked sufficiently large/deep wall mount points, and/or lacked exterior ring to support magnetic attachment, so here's another corner mount for the pile. Enjoy. Updated to V2: Mount holes…
Door lock spacer for a Smart lock form Aqara Model U200
Needed a fast and easy to print mount for the Aqara temperature sensor. You can mount it with screws or dubble sided tape. Print Settings Printer: Flsun QQ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10%…
Honeycomb Storage Wall Mounts for some common Thermometer / Hygrometers: Xiaomi Mijia Aqara WSDCGQ11LM Common Rectangular Hygrometer All print in given orientation without supports. ♥ Looking forward to your makes! ♥
Use with 4x M3x20 screws (DIN 912) 4x M3 (DIN 562) square nuts Mount on wall with double sided tape
Would you like the shades to move up and down at a faster rate? I've created a parametric pulley specifically for the Aqara roller shade driver E1, and I've included STL files for pulleys with 6 to 18 teeth. The speed of the shades is…
Hinge to mount an Aqara Zigbee magnetic door sensor to a tilting garage door - it opens under gravity when the door is open. Use M4 screws to make the axle for the rotating sensor support. Usable also with other sensors with a similar…
Outdoor shell that fits Aqara G4 doorbell for some additional protection from the elements. Not waterproof, but if water does get inside, there's an opening on the bottom, so that water won't be trapped. Work in progress, so I'll gladly…
Holder / case for Xiaomi (V2) Aqara Door sensor and magnet. For the V1 (round) version, see https://www.thingiverse.com/thing:2791484 . You can get it easy out for battery change. You can stick it to the wall or use some screws. I printed…
Remix to fit Aqara P1 Sensor
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wall mount support for aqara FP2 with 45° angle. Follow me if you like this
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
A simple cover to protect your Aqara temp/humidity sensor against the elements. I've included the step file for easy alteration and remixing. I used tape, but you may want a mounting hole through the back.
This is just another wall mount for the Xiaomi Aqara motion sensor. I wanted a simple holder that I can stick to the tiling in the bathroom. Print Settings Resolution: 0.2 Infill: 10-15% Post-Printing Put some double sided tape to the…
Steeper 40 degree mount for Aqara G4 video doorbell
The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…
This is a quick and easy mounting bracket for the Aqara Motion Sensor P1.
i'm making some mounts for my aqara door/window magnetic sensors. these are the models i mocked up for the sensor and magnet, so i can model around them. i figured i'd post them so anyone else modelling something related to these sensors…
A small stand I made to hold my FP2 upright on a table
USE AT OWN RISK! The sensor is not meant to be used outdoors! However I tried to find the best compromise between protection of and genuine values. Use white filament if on hand. Sample printed with ASA. No supports required if printed…
My handle has 92mm centres (spindle to lock centre) and is the type where the top screw is below the handle. My handle's dimensions are 32mm wide, 11mm deep and the bottom of the handle is 79mm from the lock centre. To adjust, open the…
The cover is for the keyboard of the Aqara U200 lock. You can use it if you don't like the original black color or if you want to protect the keyboard from the sun. The cover is intentionally a little wider so that you can insert foam for…
With this case you can use the Aqara Tempreture Sensor outside. For damage on the sensor, I assume no liability! Print Settings: 0.20mm layers PLA / PETG 15% Infill No Support Print the design upside down! Printed Parts: Outdoor Aqara…
This bracket holds an Aqara Wireless Mini Switch and makes it super easy to mount on a wall. The switch fits into the mount with friction and is removable. Update: Added a thicker version of the mount for newer 13mm thick buttons. This…
Having experimented with various designs I found online, I eventually decided to create the ultimate corner-mounting bracket for the Aqara FP2 presence sensor. Through a series of trials and adjustments, I perfected the design to achieve…
Print bottom down (what would be the bottom if it were mounted on the wall). Use brim since that surface will be small. I suggest this orientation because it will require no supports and the print should be dimensionally accurate printed…
I wanted to mount the Aqara Sensor to my skids wall. I used the very good T-Clip System from Line Arc Line. To get it low profile enough, I used the low profile mount clips from tchoupshop. You will need one of the clips from here:…
Mini rain-protection roof for the Aqara G4 Doorbell. Prints without supports in 1h45 (35g of filament). My doorbell has seen some medium rain since I installed it and it is good so far, I can't guarantee anything obviously. The back is to…
Based on a Stevenson screen design, this modular box will protect a Xiaomi temperature and humidity sensor from the elements. You'll need to print 4 middle pieces to get the right height. The top, bottom and middle pieces snap together,…
I have two cats but I didn't want to buy and coordinate two pet feeders, so I designed and printed a splitter. This design is based on my previous WOPET splitter , I just finally upgraded to a name-brand pet feeder and needed to redesign…
I recommend printing the “bell” side as the first layer, we get an clear surface to stick the frame on its factory double-sided tape.
A simple way to alternate the look of your Aqara U200 with a new front plate or cover. Printing tipps: enable “Only one wall on first layer” in quality settings (Bambu Studio / Orca Slicer) for a cleaner look center and then rotate the…
FR : Cet accessoire a été conçu pour vous avertir chaque fois que votre boîte aux lettres est ouverte, vous permettant de savoir exactement quand votre courrier arrive (lettre ou colis). Plus besoin de vérifier constamment si le facteur…
Der Halter gibt einem die Freiheit den Aqara FP2 so auszurichten das er den Raum bestmöglich abdeckt. Das ermöglicht die montage an mehreren Plätzen so wie es am besten passt.…
This is my take on building an compact outdoor case for the square Xiaomi (Aqara) temperature sensor. I think it is the smallest that I could find and still be usable. Until now it is functioning perfectly. I printed in PLA without any…
My mount for Aqara vibration sensor with added spring to enhance minor vibrations. I needed it to trigger the sensor inside the post box becaue it was too solid to register a delivery Added a V2 with an additional bend for more sensitivity.
The Aqara Cube is a cool little Zigbee device which detects flip, rotate, shake and tap gestures. It enables the user to create automations depending on which side of the cube is facing up, however, only 2 of the 6 sides have identifiable…
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
A simple outdoor housing for the Aqara Temperature and Humidity Sensor (Zigbee), based on the case from Andos . The case fulfills its purpose and protects the sensor from wind, rain and direct sunlight. It is also relatively compact, not…
Mount with a screw inside the corner tip.
You can choose holder with one or two mounting holes and with or without roof. Můžete si vybrat držák s jedním nebo dvěma montážními otvory a se stříškou nebo bez ní.
A simple base/riser to bring the sensor and its counterpart to the same level. Raises the sensor by 2cm (thickness of the door). No special print settings necessary, most common default settings should work. Ein einfacher Sockel um den…
Small holder for Aqara window/door sensor. This holder is very tight designed and uses very little wall material to make it as small as possible but still having some stability (but don't expect too much). I use it to put it inside my…
The Aqara U200 is a newly released retrofit smart lock, but its keypad design presents a significant security flaw. The keypad can be easily removed and stolen due to a release pinhole that allows anyone to detach it from its wall mount.…
You can either print it in one piece (complete) or print front and back separately (front and back) - for less supports - and glue them together.
Holder for Aqara switches. I find it more convenient if the switch is not glued to the support, so I removed the adhesive sticker from the back. I used the other biadhesive that comes with the switch on the back of this support. Print it…
I needed a mount for my Xiaomi Aqara Motion Sensor P1 to attach it under a kitchen cabinet above worktop.The sensor easily snaps in. I was unable to find such a design here so I created it myself. Along with a automation in Home Assistant…
A simple friction mount for the aqara water leakage sensor. I needed it to mount it to the underside of things and still be able to simply remove it to exchange the battery. Therefore really only useful if you connect cables to it, since…
I use these sensors (https://www.amazon.com/gp/product/B07D37FKGY/) in my printer enclosure and in my bathrooms to tell when someone is showering to kick on the exhaust fan to remove the steam (and turn the fan off after it's clear). I…
I've designed an arm to be used with Aqara Roller Shade driver E1 for a Robot Vacuum Garage Doors project for my friend. The project details are well described here:…
Although I have OctoPrint, I don't use a webcam connected to it to monitor prints remotely. Instead, I use a HomeKit solution with the Aqara G2H (or Pro) hub to manage a few printing needs. This is a shelf that I use to monitor the print…
Aqara S1E Base, printed by PETG 0.2mm layout or 0.1mm for best , no support
The adaptors included in the Aqara thermostat pack did not fit my valve thread. I've made this adaptor and it works fine with the included plastic extender. I've printed my part with a 0.6 nozzle since my 0.4 just broke down but it turned…
I designed this smart sensor holder so you can mount the Aqara FP2 mm presence sensor into the wall corner, or, if you would like, all the way at the upper room corner easily, with space to feed the usb cord into the mount while…
Wall mount for the Aqara Temp and Humidity sensor
For hiding the mounting screw. May also serve as weather protection. I use it as a doorbell.
Updated version of the Aqara Light Switch Spacer by Doowle (on Thingiverse) to fit the up-to-date version of the Aqara H1 Light Switches. I have lowered the roundness of the edges and updated the measurements(original version by Doowle…
Drop in Corner Mount for Aqara FP300 Hex cutouts in the back reduce resin required by ~20%
Just added a hole to screw the sensor to the wall instead of using double sided tape. Awesome original design.
A holder for the Xiaomi Motion Sensor Zigbee You will need 2 m3 screws and 2 m3 washer
Holder for Xiaomi Aqara Switch. You can get it easy out for battery change. You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case because of the less…
This spool is compatible with the Aqara blind driver and should provide a fairly snug fit onto the motor output shaft. The driver appears to provide enough torque to raise roman blinds. Will work with a pull string up to about 1m long.…
Simple mounts for the Aqara FP300. I’ve included STEP files so you can easily modify them. Stand: Simple stand for flat surfaces. Clip: A clip with a 4.85mm gap which fits my cabinet door. You will likely need to adjust the STEP file to…
